Read Sharp MX-PE10 FIERY (serv.man2) Service Manual online
I
NTRODUCTION
12
• When connecting or disconnecting the power cord:
– Only use the power cord that shipped with the Fiery Server or an appropriate
replacement power cord available from an authorized provider.
– Always disconnect the power cord from the Fiery Server connector panel before
opening the unit and servicing internal components.
– Do not pull on the power cord when unplugging the Fiery Server. Instead, pull the
plug.
– Do not place objects on the power cord. Place the power cord away from foot traffic.
– Do not tamper with or disable the power cord grounding plug.
– Do not use a 3-prong adapter in a 2-hole, ungrounded outlet.
– Do not use an extension cord.
– Do not plug the Fiery Server into a circuit with heating or refrigeration equipment
(including water dispensers).
– Do not plug the Fiery Server into a switchable power outlet. This can result in the Fiery
Server being turned off accidentally.
• Never set any liquid on or near the Fiery Server or the MFP. If liquid is spilled into the Fiery
Server or the MFP, disconnect the power cord immediately.
• Do not attempt to open the power supply, DVD drive, or hard disk drive.
• Handle the Fiery Server LCD window with care.
If the Fiery Server LCD window breaks and the liquid crystal inside leaks out, avoid contact.
If you come in contact with the liquid crystal, immediately wash it off your skin with soap
and water.
If you come in contact with the liquid crystal, immediately wash it off your skin with soap
and water.
• Use care when handling parts of the Fiery Server, as some edges on the unit may be sharp.
• Do not install third-party applications onto the Fiery Server. Third-party applications are not
supported and can cause system problems. Although virus scans are permitted on the Fiery
Server, antivirus software should not be loaded in memory-resident mode.
Server, antivirus software should not be loaded in memory-resident mode.
• Do not change the Windows operating system software preference settings.
Depending on the changes made, the Fiery Server may become unstable or even unusable. If
this occurs, we recommend that you reinstall the Fiery Server System Software, which reliably
restores the Windows operating system software to its factory defaults.
this occurs, we recommend that you reinstall the Fiery Server System Software, which reliably
restores the Windows operating system software to its factory defaults.
• Never alter an existing network without permission.
The Fiery Server will probably be connected to an existing Local Area Network (LAN) based
on Ethernet hardware. The network is the link between the customer’s computer, existing
laser printers, and other prepress equipment. Never disturb the LAN by breaking or making a
network connection, altering termination, installing or removing networking hardware or
software, or shutting down networked devices without the knowledge and explicit permission
of the system or network administrator or shop supervisor.
on Ethernet hardware. The network is the link between the customer’s computer, existing
laser printers, and other prepress equipment. Never disturb the LAN by breaking or making a
network connection, altering termination, installing or removing networking hardware or
software, or shutting down networked devices without the knowledge and explicit permission
of the system or network administrator or shop supervisor.
Click on the first or last page to see other MX-PE10 FIERY (serv.man2) service manuals if exist.