Read Sharp MX-M905 (serv.man7) User Guide / Operation Manual online
10
1.2
High Density Adjustment Settings
Select the [High Density Adjustment Settings] key in the
Image Quality Adjustment screen.
1.2.1 Density Adjustment Automatic Execution
Frequency
This makes a setting of frequency (condition) to perform
density adjustment (process control) automatically.
1) Select the [Density Adjustment Automatic Execution
Frequency] key in the High Density Adjustment
Settings screen.
2) When job efficiency is prior, set Density adjustment
during job to the [No] key. When image stability is prior,
set Density adjustment to the [Yes] key.
Note:
Even if the Density adjustment during job is set to the
[No] key, density adjustment may execute by machine
state.
3) When the density adjustment during job is set to the
[Yes] key, tap the [+] and [-] keys to change the
execution frequency of the density adjustment.
To set the Execution Frequency value to the pre-set
value, tap the [Custom] key.
Density adjustment during job:
[Yes]: The process control adjustment interrupts the job
in progress.
[No]: The process control adjustment does not
interrupt the job in progress.
Default: [No]
Execution Frequency:
Input range: [-2] to [2]
Default: [0]
Note:
When the density adjustment while a job is in
progress is set to the [No] key, the execution
frequency is grayed out with the default value
displayed.
4) To reflect the settings, the machine needs to reboot.
When the [Register] key is tapped, a message appears
prompting you to reboot the machine.
5) Tap the [OK] key to reboot the machine.
1.2.2 Maximum Density Setting
This performs the adjustment of maximum density.
1) Select the [Maximum Density Setting] key in the High
Density Adjustment Settings screen.
2) To change the maximum density setting of density
adjustment, tap [+] and [-] key.
To set the Execution Frequency value to the pre-set
value, tap the [Custom] key.
Max. Density (K): [-2] to [2]
Default: [0]
Note:
Toner consumption may increase by the settings.
3) Tap the [Register] key to register the setting.
4) To reflect the settings, the machine needs to reboot.
When the [Register] key is tapped, a message appears
prompting you to reboot the machine.
5) Tap the [OK] key to reboot the machine.
6) After the machine is rebooted, perform Calibration in
the system settings instead.
7) The setting in step 3) is reflected.
Note:
When this adjustment is performed, Gray Balance
Adjustment (for Copy) and Gray Balance Adjustment
(for Print) need to be adjusted.
When the Standard Calibration is performed, values
entered manually using Gray Balance Adjustment (for
Copy) and Gray Balance Adjustment (for Print) are
initialized. If you do not want to initialize these values,
you must perform Calibration in the system settings
instead.
When this adjustment is performed, a message will
appear in the touch panel prompting you to perform
Calibration in the system settings.
Click on the first or last page to see other MX-M905 (serv.man7) service manuals if exist.