Read Sharp MX-M905 (serv.man7) User Guide / Operation Manual online
7
4) A test patch is printed.
Note:
When the printing of a test patch fails, the following
message appears: Printing test patch has failed. Use
8 1/2" X 11" or A4 paper for this adjustment. Tap the
[Execute] key to print the test patch.
5) Place the test patch on the document glass and tap the
[Execute] key to start the adjustment.
Note:
When the scanning of the test patch fails, the
following message appears: Auto adjustment has
failed. Please check if the test patch is properly set on
the document glass. Tap the [Execute] key to resume
scanning.
6) When the adjustment is completed, a completion
message appears and the adjustment result is printed.
Note:
When the printing of the adjustment result fails, the
following message appears: Printing adjustment
result has failed. Use 8 1/2" X 11" or A4 paper. Tab
the [Execute] key to print the adjustment result.
7) Tap the [Back] key to return to the Laser Adjustment
screen.
Note:
It is recommended to perform Auto Adjustment
several
times. (2 to 3 times)
8) Make sure to perform [1.4.3 Standard Calibration]
under [Settings] if you wish not to erase the adjustment
values set by [1.4.1 Gray Balance Adjustment (for
Copy)] and [1.4.2 Gray Balance Adjustment (for Print)])
after this adjustment. Make sure to choose both the
copy and printer calibrations in the calibration.
1.1.2 Density Smoothing Adjustment
(Densitometer Adjustment)
This performs density smoothing adjustment for printing in
front / rear (main scan) direction by measuring test patch
with a densitometer.
Note:
The densitometer is to be prepared by users.
1) Select the [Densitometer Adjustment] key in the Laser
Adjustment screen.
2) To print a test patch, tap the [Execute] key in the
Density Smoothing Adjustment (Densitometer
Adjustment) screen. If you need to change the density,
select the desired density and then tap the [Execute]
key.
Note:
To return your preferences to the factory defaults, tap
the [Return to the Defaults (Density Smoothing
Adjustment)] key. When a confirmation message
appears, tap the [OK] key. The machine reboots to
return to the factory defaults.
R Side
F Side
R Side
F Side
Click on the first or last page to see other MX-M905 (serv.man7) service manuals if exist.