Read Sharp MX-M364N / MX-565N (serv.man4) Service Manual online
MX-M565N ADJUSTMENTS AND SETTINGS 4 – 55
b. Adjustment procedure
(Auto gray balance adjustment by the serviceman)
Printer gray balance and density adjustment (Automatic adjustment) procedure
flowchart (SIM67-24)
Start
Execute ADJ11E(1) (Printer gray balance and density
adjustment) (Automatic adjustment).
Enter the SIM67-24 mode, and select A4
(11" x 8.5") paper.
Press [EXECUTE] key.
(The adjustment pattern is printed.)
Set the adjustment pattern on the document table.
Press [EXECUTE] key. (The adjustment pattern
is scanned, and the adjustment is automatically
performed to print the check pattern.)
Press [EXECUTE] key. (The adjustment pattern
is scanned, and the adjustment is automatically
performed to print the check pattern.)
Check the printed check pattern for any streaks or
unclear copy. (*3)
unclear copy. (*3)
Press [OK] key. (The initial setting of the halftone
image correction is automatically performed.) (*1)
image correction is automatically performed.) (*1)
Cancel SIM67-24.
*1:
If the initial setting of the halftone image correction is not
properly adjusted, satisfactory gray balance and density
cannot be obtained. In this case, check the print engine for
any problems.
*2:
If satisfactory gray balance and density are not obtained
with ADJ11E(2) (Printer gray balance and density
adjustment) (Manual adjustment) (SIM67-25), check the
print engine for any problems.
*3:
If there is any streak or unclear copy on the printed check
pattern, check the print engine for any problems.
If the initial setting of the halftone image correction is not
properly adjusted, satisfactory gray balance and density
cannot be obtained. In this case, check the print engine for
any problems.
*2:
If satisfactory gray balance and density are not obtained
with ADJ11E(2) (Printer gray balance and density
adjustment) (Manual adjustment) (SIM67-25), check the
print engine for any problems.
*3:
If there is any streak or unclear copy on the printed check
pattern, check the print engine for any problems.
Execute ADJ11E(2) (Printer gray balance and density
adjustment) (Manual adjustment). (SIM67-25) (*2)
adjustment) (Manual adjustment). (SIM67-25) (*2)
YES
NO
Are the gray balance and
density at the satisfactory
level?
End
Use SIM64-5 to print the self print check pattern,
and check the printer gray balance and density.
Check the self print check pattern to check the printer
gray balance and density adjustment.
Click on the first or last page to see other MX-M364N / MX-565N (serv.man4) service manuals if exist.