MX-M364N, MX-565N (serv.man4). Service Manual (Revised January 2016). - Sharp Copying Equipment Service Manual (repair manual). Page 82

Read Sharp MX-M364N / MX-565N (serv.man4) Service Manual online

MX-M565N  ADJUSTMENTS AND SETTINGS  4 – 52
 
11-D
(14) 
Watermark adjustment 
(Normally not required)
a. General
This adjustment is used to adjust the reproduction capability of the
watermark in the copy/printer mode.
This adjustment is used for watermark documents (primary output).
The result of this adjustment affects the result of watermark print
(secondary output).
In the printer mode, the watermark density can be adjusted by the
printer driver. That adjustment is based on the result of this adjust-
ment.
This adjustment must be performed in the following cases:
* When there is request from the user. (When a satisfactory result
is not obtained from the adjustment in the system setting mode.)
* When there is request from the user. (When a satisfactory result
is not obtained from the adjustment with the printer driver.)
b. Adjustment procedures
1)
Enter the SIM 46-66 mode.
2)
Select the PATTERN mode, then select an adjustment item in
the following list according to the situation.
NOTE: Normally there is no need to adjust the PATTERN mode
(items E and F), the COPY MODE, and the POSITION
mode.
*1: When the adjustment value is varied by  1, the line space is varied by 0.1mm.
*2: When the adjustment value is varied by  1, the upper and the lower margins are varied by 0.1mm.
*3: When the adjustment value is varied by  1, the left and the right margins are varied by 0.1mm.
Category
Item
Display
Content
Setting 
range
Default 
value
PATTERN
A
WOVEN DEN BK LOW
Watermark density level (Black LOW)
0 - 255
15
B
WOVEN DEN BK MIDDLE
Watermark density level (Black MIDDLE)
0 - 255
19
C
WOVEN DEN BK HIGH
Watermark density level (Black HIGH)
0 - 255
23
D
CONTRAST
Contrast adjustment
0 - 255
2
E
HT TYPE (POSI)
For halftone index watermark type positive
42 - 43
42
F
HT TYPE (NEGA)
For halftone index watermark type negative
42 - 43
42
COPY 
MODE
A
TEXT/PRINTED PHOTO
Text/Printed Photo mode select Enable/Disable
OFF
0 - 1
1
ON
B
TEXT
Text mode select Enable/Disable
OFF
0 - 1
1
ON
C
PRINTED PHOTO
Printed Photo mode select Enable/Disable
OFF
0 - 1
1
ON
D
PHOTOGRAPH
Photograph mode select Enable/Disable
OFF
0 - 1
1
ON
E
TEXT/PHOTO
Text/Photograph mode select Enable/Disable
OFF
0 - 1
1
ON
F
MAP
Map mode select Enable/Disable
OFF
0 - 1
1
ON
G
LIGHT
Light density document mode select Enable/Disable
OFF
0 - 1
1
ON
H
AUTO
Automatic mode select Enable/Disable
OFF
0 - 1
1
ON
I
DEFAULT MODE
Default exposure mode
TEXT/PRINTED PHOTO
0 - 5
0
Used to specify the exposure mode set 
when the watermark is ON.
TEXT
PRINTED PHOTO
PHOTOGRAPH
TEXT/PHOTO
MAP
POSITION
A
LINE SPACE 1
Line space in the watermark print box (24P - 36P) (*1)
0 - 200
20
B
LINE SPACE 2
Line space in the watermark print box (37P - 48P) (*1)
0 - 200
20
C
LINE SPACE 3
Line space in the watermark print box (49P - 64P) (*1)
0 - 200
20
D
LINE SPACE 4
Line space in the watermark print box (65P - 80P) (*1)
0 - 200
20
E
BLANK H/B 1
Upper margin/Lower margin in the watermark print box (24P -  36P) (*2)
0 - 200
10
F
BLANK H/B 2
Upper margin/Lower margin in the watermark print box (37P -  48P) (*2)
0 - 200
10
G
BLANK H/B 3
Upper margin/Lower margin in the watermark print box (49P -  64P) (*2)
0 - 200
10
H
BLANK H/B 4
Upper margin/Lower margin in the watermark print box (65P -  80P) (*2)
0 - 200
10
I
BLANK L/R 1
Left margin/Right margin in the watermark print box (24P  -  36P) (*3)
0 - 200
60
J
BLANK L/R 2
Left margin/Right margin in the watermark print box (37P  -  48P) (*3)
0 - 200
90
K
BLANK L/R 3
Left margin/Right margin in the watermark print box (49P  -  64P) (*3)
0 - 200
120
L
BLANK L/R 4
Left margin/Right margin in the watermark print box (65P  -  80P) (*3)
0 - 200
150
Display
Click on the first or last page to see other MX-M364N / MX-565N (serv.man4) service manuals if exist.
Random: