Read Sharp MX-M364N / MX-565N (serv.man4) Service Manual online
MX-M565N SIMULATION 5 – 25
(*2)
26-51
Purpose
Setting
Function (Purpose)
Set the specifications of the serial port
operation. (For PCI)
operation. (For PCI)
Section
Operation/Procedure
1)
Enter the set value with 10-key.
When the PCI is installed, setting is made to 1 or 2.
2)
Press [OK] key.
MODE1: Red LED is light/blink/OFF, MODE2: Red LED always
OFF
OFF
When PCI SETTING is changed from “0” to “1” or “2” . if SIM26-3
“OUTSIDE AUDITOR” is set to “S_VENDOR”. “AUDITOR” is
changed to “NONE”.
“OUTSIDE AUDITOR” is set to “S_VENDOR”. “AUDITOR” is
changed to “NONE”.
26-52
Purpose
Setting
Function (Purpose)
Set whether non-printed paper (insertion
paper, cover paper) is counted up or not.
paper, cover paper) is counted up or not.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
26-53
Purpose
Setting
Function (Purpose)
Set Inhibit/Allow of the user auto calibration
(gradation, density adjustment) in the copy
mode.
(gradation, density adjustment) in the copy
mode.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
Target
paper
Target paper setting
0
1
1K
saddle
stitch
finisher
saddle
stitch
finisher
Postcard,
envelope
envelope
The operation is stopped when
30 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and less than 30
sheets of a kind are
continuously discharged, the
operation is performed similarly
to that of setting value "1".
30 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and less than 30
sheets of a kind are
continuously discharged, the
operation is performed similarly
to that of setting value "1".
The operation
is stopped
when the
paper exit tray
full, 500
sheets, or
94mm height
of paper exit is
detected.
is stopped
when the
paper exit tray
full, 500
sheets, or
94mm height
of paper exit is
detected.
Label
sheet, tab
sheet, OHP
sheet, tab
sheet, OHP
The operation is stopped when
100 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and less than 100
sheets of a kind are
continuously discharged, the
operation is performed similarly
to that of setting value "1".
100 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and less than 100
sheets of a kind are
continuously discharged, the
operation is performed similarly
to that of setting value "1".
Inner
finisher
finisher
Postcard,
envelope
envelope
The operation is stopped when
10 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and less than 10
sheets of a kind are
continuously discharged, the
operation is performed similarly
to that of setting value "1".
10 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and less than 10
sheets of a kind are
continuously discharged, the
operation is performed similarly
to that of setting value "1".
The operation
is stopped
when the
paper exit tray
full, 250
sheets, or
33.5mm
height of
paper exit is
detected.
is stopped
when the
paper exit tray
full, 250
sheets, or
33.5mm
height of
paper exit is
detected.
Label
sheet, tab
sheet, OHP
sheet, tab
sheet, OHP
The operation is stopped when
100 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and less than 100
sheets of a kind are
continuously discharged, the
operation is performed similarly
to that of setting value "1".
100 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and less than 100
sheets of a kind are
continuously discharged, the
operation is performed similarly
to that of setting value "1".
4K
finisher
finisher
Postcard,
envelope
envelope
The operation is stopped when
100 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and less than 100
sheets of a kind are
continuously discharged, the
operation is performed similarly
to that of setting value "1".
100 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and less than 100
sheets of a kind are
continuously discharged, the
operation is performed similarly
to that of setting value "1".
The operation
is stopped
when the
paper exit tray
full, 650
sheets, or
94mm height
of paper exit is
detected.
is stopped
when the
paper exit tray
full, 650
sheets, or
94mm height
of paper exit is
detected.
Label
sheet, tab
sheet, OHP
sheet, tab
sheet, OHP
The operation is stopped when
100 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and less than 100
sheets of a kind are
continuously discharged, the
operation is performed similarly
to that of setting value "1".
100 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and less than 100
sheets of a kind are
continuously discharged, the
operation is performed similarly
to that of setting value "1".
Item/Display
Content
Default
value
A
PCI SETTING
0
Serial port PCI mode OFF. (For
connecting the serial port vendor)
connecting the serial port vendor)
0
1
Serial port PCI mode ON. (JOB
status LED MODE1)
status LED MODE1)
2
Serial port PCI mode ON. (JOB
status LED MODE2)
status LED MODE2)
0
Count up
1
No count up
Destination
Default
U.S.A
0 (Counted)
CANADA
0 (Counted)
INCH
0 (Counted)
JAPAN
1 (Not counted)
AB_B
0 (Counted)
EUROPE
0 (Counted)
U.K.
0 (Counted)
AUS.
1 (Not counted)
AB_A
0 (Counted)
CHINA
0 (Counted)
Item/Display
Content
Default
value
A
COPY
0
Inhibit
1
1
Allow
B
PRINTER
0
Inhibit
1
1
Allow
Click on the first or last page to see other MX-M364N / MX-565N (serv.man4) service manuals if exist.