Read Sharp MX-M364N / MX-565N (serv.man4) Service Manual online
MX-M565N SIMULATION 5 – 24
26-32
Purpose
Setting
Function (Purpose)
Set the specifications of the fusing cleaning
operation.
operation.
Section
Fusing
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
26-35
Purpose
Setting
Function (Purpose)
Set the display mode of SIM22-4 trouble
history when a same trouble occurred
repeatedly. There are two display modes:
display as one trouble or display as several
series of troubles.
history when a same trouble occurred
repeatedly. There are two display modes:
display as one trouble or display as several
series of troubles.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
26-38
Purpose
Setting
Function (Purpose)
Set "Print continue" or "Print stop" when the
maintenance timing is reached or the con-
sumable part life is over.
maintenance timing is reached or the con-
sumable part life is over.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
26-41
Purpose
Setting
Function (Purpose)
Set Enable/Disable of the magnification
ratio automatic select function (AMS) in the
center binding mode.
ratio automatic select function (AMS) in the
center binding mode.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
<Default value of each destination>
26-49
Purpose
Setting
Function (Purpose)
Set the print speed of postcards mode.
Section
Operation/Procedure
Select the copy speed mode with the touch panel. (Default: LOW)
When the setting is changed, the paper feed interval in print or
copy in the postcard mode is changed and the job speed is
changed accordingly.
copy in the postcard mode is changed and the job speed is
changed accordingly.
LOW: The paper feed interval is long. (Normal mode)
HIGH: The paper feed interval is short. (when a paper jam occurs,
the number of sheets of jam paper is greater than that in the LOW
mode.)
the number of sheets of jam paper is greater than that in the LOW
mode.)
26-50
Purpose
Setting
Function (Purpose)
Set the operation specifications and func-
tions.
tions.
Section
Operation/Procedure
1)
Select a target item of setting with scroll key on the touch
panel.
panel.
2)
Enter the set value with 10-key.
3)
Press [OK] key. (The set value is saved.)
(*1) Default values for each destination of item A
Item
Display
Content
Default
value
A
CLEANING
PRINT SET
PRINT SET
0
User fusing cleaning function is
Enabled
Enabled
1
1
User fusing cleaning function is
Disabled
Disabled
0
Only once display.
1
Any time display.
Item/Display
Content
Default
value
A
MAINTENANCE
LIFE OVER
LIFE OVER
0
When the maintenance life is
over (Print Continue)
over (Print Continue)
0
1
When the maintenance life is
over (Print Stop)
over (Print Stop)
B
FUSER WEB END
(0: CONTINUE
1: STOP)
(0: CONTINUE
1: STOP)
0
Continue/Stop setting of print
when the fusing web is end
(Print Continue)
when the fusing web is end
(Print Continue)
0
1
Continue/Stop setting of print
when the fusing web is end
(Print Stop)
when the fusing web is end
(Print Stop)
0
AMS Disable
1
AMS Enable
U.S.A
0 (Disable)
EUROPE
1 (Enable)
CANADA
0 (Disable)
U.K.
1 (Enable)
INCH
0 (Disable)
AUS.
0 (Disable)
JAPAN
0 (Disable)
AB_A
0 (Disable)
AB_B
0 (Disable)
CHINA
0 (Disable)
Item/Display
Content
Default
value
A
BW REVERSE
0
BW reverse copy Disable
Refer
to *1
1
BW reverse copy Enable
B
FINISHER
FUNCTION
FUNCTION
0
Finisher special paper
The number of paper exit is
limited.
The number of paper exit is
limited.
0
Refer
to *2
1
Finisher special paper
The number of paper exit is
not limited.
The number of paper exit is
not limited.
C
FEED TRAY
COLOR
COLOR
0
Paper feed tray color display
ON during paper feed
ON during paper feed
0
1
Paper feed tray color display
OFF during paper feed
OFF during paper feed
D
LONG SIZE PRINT
0
Disable
0
1
Enable
E
WIRELESS SET
0
Disable
0
1
Enable
Destination
Item A
U S A
1
CANADA
1
INCH
1
JAPAN
1
AB_B
1
EUROPE
1
U K
0
AUS
1
AB_A
1
CHINA
1
Click on the first or last page to see other MX-M364N / MX-565N (serv.man4) service manuals if exist.