Read Sharp MX-M310 / MX-M310N (serv.man5) Service Manual online
MX-M260/M310/M260N/M310N MX-RP10 (Reversing single pass feeder) 2 - 3
2) Set to A4R (LTR) size, adjust the guide and press the start key.
3) Fold the A/4 (LTR) paper in half, set to the A5R (Invoice R) size,
adjust the guide and press the start key.
4) Adjust the guide to the minimum width and press the start key.
5) Make sure the indicator reads 60 before pressing the start key.
6) Make sure the indicator reads 40 before pressing the start key.
7) Make sure the document size is correctly shown in Sim2-2.
C. Check the copy magnification ratio
1) Place a scale on the original table, and make a 100% copy to
make a test chart.
2) Place the test chart on the RSPF and make a 100% copy.
3) Compare the scale image and actual image.
4) If adjustment is required.
Execute Sim48-1
D. Check the center displacement
1) Place the center position adjustment test chart on the RSPF.
2) Make a copy from the manual paper feed tray and check the
printed copy with the test chart.
3) If adjustment is required.
Execute Sim 50-12
E. Check the scan position
1) Open RSPF, place a white paper on the document glass.
2) Execute Sim 53-8 and press start key.
Installation of RSPF is now complete.
SIMULATION 53-6
SPF TRAY ADJUSTMENT.
LTR PAPER SET, AND PRESS START KEY.
SIMULATION 53-6
SPF TRAY ADJUSTMENT.
INVR PAPER SET, AND PRESS START KEY.
SIMULATION 53-6
SPF TRAY ADJUSTMENT.
MIN POSITION SET, AND PRESS START KEY.
SIMULATION 53-6
SPF TRAY ADJUSTMENT. INPUT VALUE 1-99, AND PRESS
START.
60
SIMULATION 53-6
SPF TRAY ADJUSTMENT. INPUT VALUE 1-99, AND PRESS
START.
40
Click on the first or last page to see other MX-M310 / MX-M310N (serv.man5) service manuals if exist.