Read Sharp MX-M310 / MX-M310N (serv.man5) Service Manual online
MX-M260/M310/M260N/M310N MX-DE10/DE11 (Paper feed unit) 3 - 3
G. Remove the securing fixture for packing the
paper feed unit and remove the packing material
1) Remove the securing fixture for packing that fixes the paper pres-
sure plate of the tray by rotating it in the direction of the arrow and
remove the packing material.
remove the packing material.
Caution: Be sure to remove the securing fixture bofore turning on the
power.
H. Change the paper size in the tray
1) Hold the grip and slide the tray side plate to adjust it to the paper to
be used.
Then, fit the rear end plate to the specified size position.
Then, fit the rear end plate to the specified size position.
Insert the power plug of the copier to the outlet and turn on the
main switch of the copier. Then, carry out the following
procedure.
main switch of the copier. Then, carry out the following
procedure.
I.
Load paper into the paper tray
1) Do not exceed the maximum height line.
J. Check for center displacement
• Set an original on the document glass and copy it using the paper
tray in the copier.
Then, copy an original using the attached optional paper feed unit.
Then, copy an original using the attached optional paper feed unit.
• If the center of the copy image from the tray in the copier is different
from that of the copy image from the optional paper feed unit, carry
out adjustment referring to the service manual.
out adjustment referring to the service manual.
Installation of Paper feed unit is now complete.
Securing fixture for packing
Packing material
Side plate
Rear plate
Click on the first or last page to see other MX-M310 / MX-M310N (serv.man5) service manuals if exist.