Read Sharp MX-M310 / MX-M310N (serv.man5) Service Manual online
MX-M260/M310/M260N/M310N MX-DS11/DS12 (Machine stand) 4 - 1
[4] MX-DS11/DS12 (Machine stand)
1. Unpacking
Unpack the package, and check to confirm that all the parts are pro-
vided.
vided.
Packed parts
2. Installation
1) Attach the casters to the desk.
Remove the desk from the package, and put it on the floor as
shown below.
Attach the four casters and fix them with caster fixing screws.
(3 screws for each caster)
shown below.
Attach the four casters and fix them with caster fixing screws.
(3 screws for each caster)
2) Attach the adjusters.
Attach the front adjusters (2 pcs.) and the rear adjusters (2 pcs.) as
shown in the figure below.
shown in the figure below.
Machine stand
Packed parts add
MX-DS11
MX-DS12
Casters: 4pcs.
Front adjusters: 2 pcs.
Rear adjusters: 2 pcs.
Adjuster covers: 2 pcs.
Caster fixing screws: 12 pcs.
Copier connecting fixtures:
2 pcs.
2 pcs.
Screws (S tight):
2 pcs.
2 pcs.
Screws (P tight):
4 pcs.
4 pcs.
( 110)
( 80)
Rear side
Casters
Casters
Front side
Caster fixing screws
(3 for each caster)
(3 for each caster)
Rear adjusters( 80)
Front
adjuster
adjuster
Front
adjuster
adjuster
Rear side
Front side
Screw the adjusters into
the hole so that the adjuster
tips do not extend out from
the hole.
the hole so that the adjuster
tips do not extend out from
the hole.
∗
( 110)
( 110)
Click on the first or last page to see other MX-M310 / MX-M310N (serv.man5) service manuals if exist.