Read Sharp AR-MS1 Service Manual online
Parts marked with “
“ are important for maintaining the safety of the set.
Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
LASER PRINTER OPTIONS
MAIL BIN STACKER
MODEL
AR-MS1
CODE : 00ZARMS1//A1E
[1]
PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
[2]
CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
[3]
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1
[4]
UNPACKING AND INSTALLATION. . . . . . . . . . . . . . . . . . . . . . 4 - 1
[5]
EXTERNAL VIEWS AND INTERNAL STRUCTURES . . . . . . . 5 - 1
[6]
MACHINE OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1
[7]
ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1
[8]
DISASSEMBLY AND ASSEMBLY, MAINTENANCE. . . . . . . . . 8 - 1
[9]
BLOCK DIAGRAM, WIRING DIAGRAM. . . . . . . . . . . . . . . . . . 9 - 1
[10] OTHERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 1
CONTENTS
AR-MS1
AR-MS1 PRODUCT OUTLINE, CONFIGURATION-1
[1] PRODUCT OUTLINE
This unit is a paper exit unit, which allows to select a desirable tray in two or more paper exit trays (male bins), when installed to the following machines.
[2] CONFIGURATION
1.
Before installation of this unit, one of the multi-purpose tray (AR-MU1), the large capacity paper feed tray (AR-D13), and the AR-D14 must be
installed.
2.
When installing this unit together with the AR-MJ1, it may be required to install the optional power unit (AR-DC1) together.
3.
This unit cannot be installed together with the finisher (AR-FN6) or the paper exit extension tray (AR-TE3). .
Applicable models
AR-P350 / P450, AR-M350 / M450
DM-3500 / 3501 / 4500 / 4501, DM-3551 / 4551
DM-3500 / 3501 / 4500 / 4501, DM-3551 / 4551
AR-D14
AR-MU1
AR-DC1
AR-D13
AR-TE4
AR-FN6
AR-MS1
Simultaneous installation not allowed
Output units
AR-MS1
Scanner r
a
c
k
Mail-bin stacker
=Any of the units must be installed together.
Multi pur
pose dr
a
w
er
Stand/3 x 500 sheet paper dr
a
w
er
Stand/MPD & 2000 sheet
Duple
x module/b
ypass tr
a
y
Duple
x module
B/W scanner module/DSPF
Saddle stitch finisher
Finisher
Mail-bin stac
k
e
r
Exit tr
a
y
Punch unit
PS3 e
xpansion kit
F
acsimile e
xpansion kit
Pr
int ser
v
er card
Hard disk dr
iv
e
P
o
w
er supply unit
Upper e
xit tr
a
y
e
xtension
Multi-function controller board
F
ax memor
y (8 MB)
Netw
or
k scanner e
xpansion kit
*1
*1
Simultaneous installation
is required
AR-MS1 SPECIFICATIONS-1
[3] SPECIFICATIONS
1. Basic
Type
Desktop type mail bin stacker with 8-exit-tray
Transport speed
To support 35-45 sheet/minute
Transport alignment
Center alignment
Tray type
(No. of tray)
(No. of tray)
Upper
tray
tray
Lower
Tray
Tray
Mail bin tray
Output paper
capacity
capacity
Upper
tray
tray
250 sheets (A4/8.5"x11", 80g/m²)
Lower
Tray
Tray
100 sheets/bin (A4/8.5"x11", 80g/m²)
Output paper delivery
Face-down
Output paper
size
size
Upper
tray
tray
A3, B4, A4, A4R, B5, B5R, A5R
11"x17", 8.5"x14", 8.5"x13", 8.5"x11",
8.5"x11"R,5.5"x8.5"R,
Executive, Japanese post card,
Monarch(98x191),Com-10(105x241),
DL(110x220),C5(162x229),
ISO B5(176x250)
11"x17", 8.5"x14", 8.5"x13", 8.5"x11",
8.5"x11"R,5.5"x8.5"R,
Executive, Japanese post card,
Monarch(98x191),Com-10(105x241),
DL(110x220),C5(162x229),
ISO B5(176x250)
Lower
Tray
Tray
A3, B4, A4, A4R, B5, B5R
11"x17", 8.5"x14", 8.5"x13",
8.5"x11", 8.5"x11"R,
Executive
11"x17", 8.5"x14", 8.5"x13",
8.5"x11", 8.5"x11"R,
Executive
Spec of media
for paper
output
for paper
output
Upper
tray
tray
Tracing paper:52-59g/m² / 14-15lbs
Plain paper:60-128g/m² / 16-34lbs
Index paper:176g/m² / 47lbs
Cover paper:205g/m² / 54-55lbs
Transparency:
Lower
Tray
Tray
Plain 60-105g/m² / 16-28lbs
Remaining
paper
detection
paper
detection
Upper
tray
tray
Provided
Lower
Tray
Tray
Provided
Exit tray full
detection
detection
Upper
tray
tray
Provided
Lower
tray
tray
Provided
Power consumption
Less than about 20.2W
Power source
Supplied from the optional power source
(DC24V 0.8A / DC5V 0.2A)
(DC24V 0.8A / DC5V 0.2A)
External
dimensions(WxDxH)
dimensions(WxDxH)
668x508x530 (mm)
Occupied
dimensions(WxD)
dimensions(WxD)
Weight
Approx. 20kg
AR-MS1 UNPACKING AND INSTALLATION-1
[4] UNPACKING AND INSTALLATION
<Before installation>
•For installation of AR-MS1, an optional stand/paper drawer (stand/MPD
& 2000 sheet paper drawer, stand/3 x 500 sheet paper drawer or multi
purpose drawer) must have been installed.
purpose drawer) must have been installed.
Also if a multi purpose drawer has been installed, a power supply unit
(AR-DC1) is needed additionally.
1) Turn off the main switch of the main unit of the printer.
Turn the main switch located on the front side of the main unit to the
"OFF" position.
Then, remove the power plug of the main unit from the outlet.
2) Remove the upper cabinet of the stand/paper drawer.
<1>Pull out the paper tray of the stand/paper drawer.
<1>Pull out the paper tray of the stand/paper drawer.
Remove the four screws of the cabinet attached to the right side of
the main unit of the printer and remove the cabinet.
<2>Mount screw B to the position shown in the illustration.
3) Attach the mail-bin stacker.
<1>Remove the paper exit actuator from the main unit of the printer.
<2>Raise the relay unit at the side of the mail-bin stacker.
<3>Put the mail-bin stacker on the stand/paper drawer.
Put the mail-bin stacker on the stand/paper drawer temporarily and
push the lower part to slide to the exit tray section of the main unit
and to attach the stacker.
and to attach the stacker.
<4>Open the front cover of the mail-bin stacker and fix the stacker with
three screws A at the positions shown in the illustration.
Then, close the front cover and close the paper tray of the stand/
Then, close the front cover and close the paper tray of the stand/
paper drawer.
<5>Attach the mounting plates to the positions shown in the illustration
and fix them with screws A.
<Parts included>
Mounting plates: 2 pcs.
Tray: 1 pc.
Screw B: 1 pc.
Screws A: 5 pcs.
"OFF"
Cabinet
Screw B
Actuator
Relay unit
1
2
Screw A
Screw A
(Front side)
Mounting plates
Screws A
(Rear side)