Read Sharp MX-M266N / MX-M316N / MX-M356N (serv.man3) Service Manual online
MX-M356NV SIMULATION 6 – 44
44-14
Purpose
Operation data display
Function (Purpose) Used to display the output level of the tem-
perature and humidity sensor.
Section
Process (OPC drum, development)/Fusing/
LSU
LSU
Operation/Procedure
The output levels of the fusing temperature sensor, the machine
temperature sensor, and the humidity sensor are displayed.
The output levels of the fusing temperature sensor, the machine
temperature sensor, and the humidity sensor are displayed.
44-43
Purpose
Data display
Function (Purpose) Used to display the identification informa-
tion of the developing unit.
Section
Developing system
Operation/Procedure
The identification number and the identification signal level of the
developing unit are displayed.
The identification number and the identification signal level of the
developing unit are displayed.
46
46-2
Purpose
Adjustment (Monochrome copy mode)
Function (Purpose) Used to adjust the copy density in the copy
mode.
Section
Operation/Procedure
1)
1)
Select an adjustment target item with scroll key on the touch
panel.
panel.
2)
Enter the set value with 10-key.
* When the
* When the
key is pressed, the setting value of each
item can be changed with 1up (1down) collectively.
3)
Press [OK] key. (The set value is saved.)
To adjust the copy density in the low density area, select the "LOW"
mode and change the adjustment value. To adjust the copy density
in the high density area, select the "HIGH" mode and change the
adjustment value.
When the adjustment value is increased, the copy density is
increased. When the adjustment value is decreased, the copy den-
sity is decreased.
mode and change the adjustment value. To adjust the copy density
in the high density area, select the "HIGH" mode and change the
adjustment value.
When the adjustment value is increased, the copy density is
increased. When the adjustment value is decreased, the copy den-
sity is decreased.
Item/
Display
Content
Display range
TH_UM
Fusing upper thermistor main
detection temperature
Fusing upper thermistor main
detection temperature A/D value
detection temperature
Fusing upper thermistor main
detection temperature A/D value
Temperature:
0 - 255 degree C (+/- 1
degree C)
AD value: 0-1023
0 - 255 degree C (+/- 1
degree C)
AD value: 0-1023
TH_US
Fusing upper thermistor sub
detection temperature
Fusing upper thermistor sub
detection temperature A/D value
detection temperature
Fusing upper thermistor sub
detection temperature A/D value
Temperature:
0 - 255 degree C (+/- 1
degree C)
AD value: 0-1023
0 - 255 degree C (+/- 1
degree C)
AD value: 0-1023
TH_RA
Temperature thermistor
Temperature thermistor A/D value
Temperature thermistor A/D value
Temperature:
- 40.0-60.0 degree C (+/
- 0.1 degree C)
AD value: 0-123
- 40.0-60.0 degree C (+/
- 0.1 degree C)
AD value: 0-123
HUD_RA
Humidity sensor
Humidity sensor A/D value
Humidity sensor A/D value
Humidity:
5.0-90.0% (+/- 0.1%)
AD value: 0-1023
5.0-90.0% (+/- 0.1%)
AD value: 0-1023
Item/Display
Content
Display
range
NOTE
A
DVCH
KIND K
KIND K
K developing unit
identification
number
identification
number
1 - 9
The model
identification number of
the developing unit
which is backed up in
the EEPROM of the
machine.
identification number of
the developing unit
which is backed up in
the EEPROM of the
machine.
B
DV_TYP_
SEL_K
SEL_K
K developing unit
identification
detection
identification
detection
0 - 1
0 = High (Open)
1 = Low (GND)
1 = Low (GND)
C
DVCH_
AD_K
AD_K
K developing unit
identification AD
value
identification AD
value
0 - 255
AD value of the
developing unit
identification voltage
developing unit
identification voltage
Item/Display
Content
Setting
range
Default
value
A
AUTO1
Auto 1
LOW
1 - 99
50
HIGH
1 - 99
50
B
AUTO2
Auto 2
LOW
1 - 99
50
HIGH
1 - 99
50
C
TEXT
Text
LOW
1 - 99
50
HIGH
1 - 99
50
D
TEXT/PRINTED
PHOTO
PHOTO
Text/Printed
Photo
Photo
LOW
1 - 99
50
HIGH
1 - 99
50
E
TEXT/PHOTO
Text/Photograph
LOW
1 - 99
50
HIGH
1 - 99
50
F
PRINTED PHOTO
Printed Photo
LOW
1 - 99
50
HIGH
1 - 99
50
G
PHOTOGRAPH
Photograph
LOW
1 - 99
50
HIGH
1 - 99
50
H
MAP
Map
LOW
1 - 99
50
HIGH
1 - 99
50
I
AUTO1
Auto 1 (copy
to copy)
to copy)
LOW
1 - 99
50
HIGH
1 - 99
50
J
AUTO2
Auto 2
(copy to copy)
(copy to copy)
LOW
1 - 99
50
HIGH
1 - 99
50
K
TEXT
Text
(copy to copy)
(copy to copy)
LOW
1 - 99
50
HIGH
1 - 99
50
L
TEXT/PRINTED
PHOTO
PHOTO
Text printed
photo
(copy to copy)
photo
(copy to copy)
LOW
1 - 99
50
HIGH
1 - 99
50
M
PRINTED PHOTO
Printed photo
(copy to copy)
(copy to copy)
LOW
1 - 99
50
HIGH
1 - 99
50
Click on the first or last page to see other MX-M266N / MX-M316N / MX-M356N (serv.man3) service manuals if exist.