Read Sharp MX-M266N / MX-M316N / MX-M356N (serv.man3) Service Manual online
MX-M356NV SIMULATION 6 – 35
30-2
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the sen-
sors and the detectors in the paper feed
section and the control circuits.
section and the control circuits.
Section
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
The sensors and the detectors which are turned ON are high-
lighted.
The operating conditions of the sensors and detectors are dis-
played.
The sensors and the detectors which are turned ON are high-
lighted.
40
40-2
Purpose
Adjustment/Setup
Function (Purpose) Manual paper feed tray paper width sensor
adjustment.
Section
Paper feed
Operation/Procedure
1) Open the manual paper feed guide to the max. width (MAX).
2) Press [EXECUTE] key.
1) Open the manual paper feed guide to the max. width (MAX).
2) Press [EXECUTE] key.
The max. width (MAX) detection level is recognized.
3) Open the manual paper feed guide to P1 width (A4R).
4) Press [EXECUTE] key.
4) Press [EXECUTE] key.
The P1 width (A4R) detection level is recognized.
5) Open the manual paper feed guide to P2 width (A5R).
6) Press [EXECUTE] key.
6) Press [EXECUTE] key.
The P2 width (A5R) detection level is recognized.
7) Open the manual paper feed guide to the min. width (MIN).
8) Press [EXECUTE] key.
8) Press [EXECUTE] key.
The min. width (MIN) detection level is recognized.
When the above operation is not performed normally, "ERROR" is
displayed. When completed normally, "COMPLETE" is displayed.
displayed. When completed normally, "COMPLETE" is displayed.
40-7
Purpose
Adjustment/Setup
Function (Purpose) Used to set the adjustment value of the
manual paper feed tray paper width sensor.
Section
Paper feed
Operation/Procedure
1)
1)
Select a target item to be adjusted with scroll keys.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
The set value in step 2) is saved.
The set value in step 2) is saved.
41
41-1
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the docu-
ment size sensor and the control circuit.
Section
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
The sensors and the detectors which are turned ON are high-
lighted.
The operating conditions of the sensors and detectors are dis-
played.
The sensors and the detectors which are turned ON are high-
lighted.
41-2
Purpose
Adjustment
Function (Purpose) Used to adjust the document size sensor
detection level.
Section
Operation/Procedure
1)
1)
Open the document cover, and press [EXECUTE] key without
place a document on the document table.
The sensor level without document is recognized.
place a document on the document table.
The sensor level without document is recognized.
2)
Set A3 (11" x 17") paper on the document table, and press
[EXECUTE] key.
The sensor level when detecting the document is displayed.
[EXECUTE] key.
The sensor level when detecting the document is displayed.
When the above operation is normally completed, it is displayed.
C1PFD
Cassette 1 paper entry detector
C1LUD
Cassette 1 paper upper limit detector
C1PED
Cassette 1 paper empty detector
C1SS
Cassette 1 detector
C2PFD
Cassette 2 paper entry detector
C2LUD
Cassette 2 paper upper limit detector
C2PED
Cassette 2 paper empty detector
C2SS
Cassette 2 installation detector
DSW_C2
Cassette 2 door open/close detector
MPED
Manual feed paper empty detector
MPLD1
Manual feed paper length detector 1
MPLD2
Manual feed paper length detector 2
MTOP1
Manual feed tray detector 1
MTOP2
Manual feed tray detector 2
MAX POSITION
Manual feed max. width
P1(A4R)POSITION
Manual feed P1 position width (A4R)
P2(A5R)POSITION
Manual feed P2 position width (A5R)
MIN POSITION
Manual feed min. width
Item/Display
Content
Default
value
A
MAX POSITION
Manual feed max. width
235
B
P1 (A4R) POSITION
Manual feed P1 position width
(A4R)
(A4R)
143
C
P2 (A5R) POSITION
Manual feed P2 position width
(A5R)
(A5R)
78
D
MIN POSITION
Manual feed min. width
27
OCSW
Document cover status
Open: Normal display
Close: Highlighted
Close: Highlighted
PD1 - 7
Document detection
sensor status
sensor status
No document: Normal display
Document present: Highlighted
Document present: Highlighted
Sensor
name
Content
Setting
range
Defaul
t value
PD1 - 7
Document detection sensor 1 - 7
0 - 255
128
Click on the first or last page to see other MX-M266N / MX-M316N / MX-M356N (serv.man3) service manuals if exist.