MX-M1055, MX-M1205 (serv.man2). Installation Manual (Revised May 2017). - Sharp Copying Equipment Service Manual (repair manual). Page 27

MX-M1205  MX-M1055/M1205 (MAIN UNIT)  2 – 20

3) Set the gray patch image (adjustment pattern) paper printed in

procedure 2) on the document table. 
Set  the  gray  patch  image  (adjustment  pattern)  printed  in  the
procedure 2) on the document table. 
Place the gray patch image so that the fine lines are on the left
side. 
At that time, place 5 sheets of white paper on the printed gray
patch image (adjustment pattern).

4) Press [FACTORY] button, then press [EXECUTE] button. 

The copy density and gradation adjustment is performed auto-
matically, and the adjustment pattern is printed. 
If there is any streak or unclear print on the printed check pat-
tern, check the print engine for any problems.

5)

Press [EXECUTE] key. 
The  printer  gray  patch  image  (adjustment  pattern)  is  printed
out. 
(A4/11" x 8.5" or A3/11" x 17" paper is automatically selected.)

6)

Set  the  gray  patch  image  (adjustment  pattern)  printed  in  the
procedure 5) on the document table. 
Set  the  gray  patch  image  (adjustment  pattern)  printed  in  the
procedure 2) on the document table. 
Place the gray patch image so that the fine lines are on the left
side. 
At that time, place 5 sheets of white paper on the printed gray
patch image (adjustment pattern).

Q

O P

N

M

L

K

J

I

H

G

F

E

D

C

B

A

High
density

Low
density