Read Sharp MX-M1055 / MX-M1205 (serv.man2) Service Manual online
MX-M1205 MX-M1055/M1205 (MAIN UNIT) 2 – 19
4) Close the tray 1/2 (a).
b. Tray 3, tray 4
1) Gently pull out trays 3 and 4 (a) until each tray stops.
1) Gently pull out trays 3 and 4 (a) until each tray stops.
2) Adjust the guide plates (a) and (b) by squeezing their lock
levers and sliding them to match the vertical and horizontal
dimensions of the paper to be loaded.
Squeeze the lock knob on guide plate (a), (b) and slide to the
desired paper size.
For a non-standard paper size, after sliding guide plate (b) to
the desired size, press the lock button (c).
* If slid to a standard paper size, guide plate (b) will lock auto-
dimensions of the paper to be loaded.
Squeeze the lock knob on guide plate (a), (b) and slide to the
desired paper size.
For a non-standard paper size, after sliding guide plate (b) to
the desired size, press the lock button (c).
* If slid to a standard paper size, guide plate (b) will lock auto-
matically.
K. Specifications setup
Used to set the specifications with SIM26 according to the cus-
tomer's request.
tomer's request.
To customize the following items after completion of the destination
setup, change the set values.
setup, change the set values.
L. Image quality check
Be sure to check the following items related to image quality. For
details of the adjustment and checking procedures, refer to the “[5]
ADJUSTMENT” on the Service Manual.
Check that the following items are within specification. If not, carry
out the adjustment.
details of the adjustment and checking procedures, refer to the “[5]
ADJUSTMENT” on the Service Manual.
Check that the following items are within specification. If not, carry
out the adjustment.
NOTE: When installing the copier, be sure to carry out the copy
gray balance and the printer gray balance.
(1) Image loss, void area (see ADJ 9)
(2) Copy gray balance (11-A / Auto adjustment)
(2) Copy gray balance (11-A / Auto adjustment)
1)
Enter the SIM 46-74 mode.
2)
Press [EXECUTE] button.
The high density process control is performed, and the copy
gray patch image (adjustment pattern) is printed out.
(A4/11" x 8.5" or A3/11" x 17" paper is automatically selected.)
The high density process control is performed, and the copy
gray patch image (adjustment pattern) is printed out.
(A4/11" x 8.5" or A3/11" x 17" paper is automatically selected.)
a
B
a
b
c
SIM No
Content
26
6
Used to set the destination.
SIM No
Content
26
2
Paper size setting of the Tray1/LCC.
3
Used to set the auditor specification mode.
5
Used to set the number (1 or 2) of count of paper
(A3 or WLT or 8K) that passes.
1:1pc 2:2pcs
* Targets: Total counter, maintenance counter,
(A3 or WLT or 8K) that passes.
1:1pc 2:2pcs
* Targets: Total counter, maintenance counter,
developer counter.
18
Used to set YES/NO of the toner save mode (Only
in UK and Japan versions)
* Carry out the setting by the user's program
in UK and Japan versions)
* Carry out the setting by the user's program
except the UK version.
1:accept 2:inhibit
52
Used to set whether non-printed paper (insertion
paper, cover paper) is counted up or not.
1:YES 2:NO
paper, cover paper) is counted up or not.
1:YES 2:NO
Click on the first or last page to see other MX-M1055 / MX-M1205 (serv.man2) service manuals if exist.