Read Sharp MX-M1055 / MX-M1205 (serv.man2) Service Manual online
MX-M1205 MX-EB15 (MIRRORING KIT) 24 – 3
C. Installation of the RAID PWB
1)
Remove the SATA cable and the power cable from the main
HDD unit.
HDD unit.
MEMO: Open the clamp and unbind the SATA cable only.
2)
Attach the RAID PWB (Packed items No.12) with screws
(Packed items No.2 x4).
(Packed items No.2 x4).
D. Cable connection
1)
Attach the wire saddle (big size) (Packed items No.6 x2) to the
frame as per the following picture.
frame as per the following picture.
2)
Connect the power cable (Packed items No.10) to the power
cable which was disconnected C-1).
After connected, pass the power cable through the wire sad-
dles and connect to both the HDD.
cable which was disconnected C-1).
After connected, pass the power cable through the wire sad-
dles and connect to both the HDD.
