Read Sharp MX-LCX5 Service Manual online
MX-LCX5 REPLACEMENT AND ADJUSTMENT 3 – 4
6. LCT exit sensor
• Disconnect the LCT from the copier.
[A] Exit sensor unit (screw x 1, connector x 1)
[B] Exit sensor
[A] Exit sensor unit (screw x 1, connector x 1)
[B] Exit sensor
7. Paper path sensors
A. Removing the vertical feed unit
• Open the front door.
Remove:
• Upper inner cover (see 3.)
• Lower inner cover (see 3.)
• Left rear cover (see 2.)
Remove:
• Upper inner cover (see 3.)
• Lower inner cover (see 3.)
• Left rear cover (see 2.)
1)
Disconnect the harness clamps (1) and (2) (clamp x 2).
2)
Disconnect the motor harnesses (3), (4), (5) (clamp x 3, con-
nector x 11).
nector x 11).
3)
Remove:
[A] Upper stay (screw x 2)
[B] Lower stay (screw x 2)
[C] Vertical feed unit (screw x 6)
[A] Upper stay (screw x 2)
[B] Lower stay (screw x 2)
[C] Vertical feed unit (screw x 6)
B. 4th transport, 4th relay upper, lower sensors
1)
Remove the vertical feed unit. (see A.)
2)
Remove:
[A] 4th Transport sensor (screw x 1, connector x 1)
[B] 4th Relay sensor – upper (screw x 1, connector x 1)
[C] 4th Relay sensor – lower (screw x 1, connector x 1)
[A] 4th Transport sensor (screw x 1, connector x 1)
[B] 4th Relay sensor – upper (screw x 1, connector x 1)
[C] 4th Relay sensor – lower (screw x 1, connector x 1)
[A]
[B]
(1)
(2)
(3)
(4)
(5)
[A]
[B]
[C]
[A]
[B]
[C]
Click on the first or last page to see other MX-LCX5 service manuals if exist.