MX-LCX5. Service Manual - 01.05.08 - Sharp Copying Equipment Service Manual (repair manual). Page 6

MX-LCX5  REPLACEMENT AND ADJUSTMENT  3 – 2

• Open the front door.
• Remove right cover (see 2.) 
• Pull out tray [A]
Remove:
[A] Tray (see 1.)
[B] Knobs (x 3) (screw x 1 ea.)
[C] Upper inner cover (screw x 2)
[D] Knob (screw x 1)
[E] Lower inner cover (screw x 1)
[F] Paper feed unit (connector x 1, screw x 2)

Remove:
• Remove the right cover (see 2.)
• Remove the paper trays. (see 1.)
[A] Pick-up roller (stopper x 1)
[B] Feed roller (stopper x 1)
[C] Separation roller (stopper x 1)

NOTE: 1)

The LCT pick-up and separation rollers are the same
as pick-up and separation rollers of the main machine.
These rollers are interchangeable.

2)

The feed rollers of the LCT and main machine are dif-
ferent because they are designed to rotate in opposite-
directions. The feed rollers of the LCT and main
machine are not interchangeable.

3)

Never touch the surface of the rollers with bare hands.

• Clear the PM counters for the new rollers (see Section "2. Pre-

ventive Maintenance).

[A]

[B]

[C]

[D]

[E]

[F]

[A]

[B]

[C]

(1)

(2)

(3)

[A]

[B]