Read Sharp MX-LCX4 Service Manual online
MX-LCX4 REPLACEMENT AND ADJUSTMENT 3 – 3
D. 5th transport motor
Remove:
• Rear cover. (see 1.)
[A] Motor unit (screw x 4, connector x 1).
[B] Spring (x 1). First, loosen screw (1) (screw x 1).
[C] 5th Transport motor (screw x 2, Timing belt x 1)
Reinstallation
• Be sure that the tension spring is connected, then tighten the
• Rear cover. (see 1.)
[A] Motor unit (screw x 4, connector x 1).
[B] Spring (x 1). First, loosen screw (1) (screw x 1).
[C] 5th Transport motor (screw x 2, Timing belt x 1)
Reinstallation
• Be sure that the tension spring is connected, then tighten the
screw (1).
E. LCT exit motor
Remove:
• Remove the rear cover. (see 1.)
[A] Motor unit (screw x 6, connector x 1).
[B] Spring (x 1). First, loosen screw (1) (screw x 1).
[C] LCT exit motor (screw x 2, Timing belt x 1)
Reinstallation
• Be sure that the tension spring is connected, then tighten the
• Remove the rear cover. (see 1.)
[A] Motor unit (screw x 6, connector x 1).
[B] Spring (x 1). First, loosen screw (1) (screw x 1).
[C] LCT exit motor (screw x 2, Timing belt x 1)
Reinstallation
• Be sure that the tension spring is connected, then tighten the
screw (1).
F. 6th transport motor
Remove:
• Rear cover. (see 1.)
[A] Motor unit (screw x 6, connector x 1).
[B] Spring (x1). First, loosen screw (1) (screw x 1).
[C] LCT exit motor (screw x 2, Timing belt x 1)
Reinstallation
• Be sure that the tension spring is connected, then tighten the
• Rear cover. (see 1.)
[A] Motor unit (screw x 6, connector x 1).
[B] Spring (x1). First, loosen screw (1) (screw x 1).
[C] LCT exit motor (screw x 2, Timing belt x 1)
Reinstallation
• Be sure that the tension spring is connected, then tighten the
screw (1).
[A]
[B]
[C]
(1)
[A]
[B]
[C]
(1)
[A]
[B]
[C]
(1)
Click on the first or last page to see other MX-LCX4 service manuals if exist.