Read Sharp MX-LCX4 Service Manual online
MX-LCX4 REPLACEMENT AND ADJUSTMENT 3 – 2
4. LCT motors
A. Paper feed, grip motors
Each paper feed unit has a paper feed motor (1) and a grip motor
(2). The removal procedure is the same for each feed tray.
Remove:
• Rear cover (see 1.)
[A] Motor unit (screw x 4, connector x 2)
[B] Springs (x 2). First, loosen the screws (x 2) (3).
[C] Paper feed motor (screw x 2)
[D] Grip motor (screw x 2)
Reinstallation
• Attach the tension spring, then tighten the screws (3) to tighten
(2). The removal procedure is the same for each feed tray.
Remove:
• Rear cover (see 1.)
[A] Motor unit (screw x 4, connector x 2)
[B] Springs (x 2). First, loosen the screws (x 2) (3).
[C] Paper feed motor (screw x 2)
[D] Grip motor (screw x 2)
Reinstallation
• Attach the tension spring, then tighten the screws (3) to tighten
the belts.
B. 6th lift motor
Remove:
• Rear cover (see 1.)
[A] 6th lift motor (screw x 2, connector x 1)
• Rear cover (see 1.)
[A] 6th lift motor (screw x 2, connector x 1)
C. 4th transport motor
Remove:
• Rear cover. (see 1.)
[A] 4th Transport motor unit (screw x 5, connector x 1).
[B] Spring (x 1). First, loosen screw (1) (screw x 1).
[C] 4th transport motor (screw x 2, Timing belt x 1)
Reinstallation
• Be sure that the tension spring is connected, then tighten the
• Rear cover. (see 1.)
[A] 4th Transport motor unit (screw x 5, connector x 1).
[B] Spring (x 1). First, loosen screw (1) (screw x 1).
[C] 4th transport motor (screw x 2, Timing belt x 1)
Reinstallation
• Be sure that the tension spring is connected, then tighten the
screw (1).
[A]
(1)
(2)
[C]
[D]
(3)
[B]
[A]
[A]
[B]
[C]
(1)
Click on the first or last page to see other MX-LCX4 service manuals if exist.