MX-LCX4. Service Manual 01.05.08 - Sharp Copying Equipment Service Manual (repair manual). Page 5

MX-LCX4  REPLACEMENT AND ADJUSTMENT  3 – 1

MX-LCX4

Service Manual

 

[A] Top cover (screw x 4).
[B] Front door (stopper x 1).

NOTE: While lifting the top cover, remove the snap ring and front

door.

[C] Rear cover (screw x 6).
[D] Right cover (screw x 6).
[E] Paper slot cover (screw x 2).

• Open the front door.
• Remove right cover (see 1.)
Remove:
[A] Pull out tray and remove it (screw x 4)
[B] Knobs (x 3) (screw x 1 each)
[C] Upper inner cover (screw x 2)
[D] Knob (screw x 1)
[E] Lower inner cover (screw x 1)
[F] Paper feed unit (connector x 1, screw x 2)

Remove:
• Remove the right cover (see 1.)
• Remove the paper trays. (see 2.)
[A] Pick-up roller (stopper x 1).
[B] Feed roller (stopper x 1).
[C] Separation roller (stopper x 1).

NOTE: 1)

The LCT pick-up and separation rollers are the same
as pick-up and separation rollers of the main machine.
These rollers are interchangeable.

2)

The feed rollers of the LCT and main machine are dif-
ferent because they are designed to rotate in opposite
directions. The feed rollers of the LCT and main
machine are not interchangeable.

3)

Never touch the surface of the rollers with bare hands.

• Clear the PM counters for the new rollers (see Section "2. Pre-

ventive Maintenance).

[C]

[B]

[D]

[E]

[A]

[A]

[B]

[C]

[D]

[E]

[F]

[A]

[B]

[C]