Read Sharp MX-GBX1 Service Manual online
10
GBC SMARTPUNCH DIE SET - INFORMATION SHEET
IMPORTANT NOTICE REGARDING THE DIE SETS PLEASE READ
Your GBC SmartPunch die set (W2 and W3 versions), is supplied with a felt pad containing oil, a pad
retaining magnet and shield*. Do not throw these items away!
retaining magnet and shield*. Do not throw these items away!
The felt pad will provide lubrication to the punch pins under normal usage and will help to keep the punch
pins clean. The magnet is intended to keep the felt pad in place during typical handling. If the pad and
magnet came off of this die set during shipping or unpacking, please replace them as indicated in the
accompanying diagram.
pins clean. The magnet is intended to keep the felt pad in place during typical handling. If the pad and
magnet came off of this die set during shipping or unpacking, please replace them as indicated in the
accompanying diagram.
Keep this sheet as a reference in the event that the pad and magnet are removed or replaced.
3. MAINTENANCE
3.1 DIE SET PRODUCT NUMBER LISTING (DIE SET NOT SHOWN)
Die Set repair is not recommended other than to clean and lubricate the Punch Pins.
If a Die Set produces poor hole quality over time, it is more likely a result of Die Plate wear. In this case
the Die Set should be replaced with a new one.
the Die Set should be replaced with a new one.
NOTE:
Felt Pad and Retaining Magnet are not required or included with the 3-Hole or VB die
sets.
sets.
Click on the first or last page to see other MX-GBX1 service manuals if exist.