MX-GBX1. Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 14

 

14 

Punching: 

 

 

75g/m² (20lb Bond) to 216g/m² (80lb Cover), ProClick (175g/m²)   

Bypass Mode (not punching): 

52g/m² (16lb Bond) to 216g/m² (80lb Cover) 

Physical Dimensions: 

 

12“ width x 38.5” height x 28.5“ depth 

Physical Weight: 

 

SmartPunch System: 154 lbs.  

 

 

   Shipping 

Weight: 

235 

lbs. 

USA/Canada    Punch:  

115 V, 60 Hz 

 

 

 

 

 

3.0 A, 340 W, 1160 BTU/Hr

 

 

SmartPunch provides a flexible, cost effective punching solution for light to medium level production 
oriented customers.  
•  Designed for customers that have the need to punch their documents at a maximum of 60-70% of their 

overall workflow. 

•  Recommended punching limit to 300k sheets per month.  (600k sheets in bypass mode) 

•  Die Sets will decrease in performance over time based on the types of stocks and weights that are 

being punched. 

• GBC guarantees a minimum of 500k punches per die set.  However, if paper stock punched is 

typically 20lb bond, then up to 2 million punches can be achieved. 

•  Dies should be regarded as a long-term supply item. 
 

 

SmartPunch is designed to punch this size only (Long edge feed) no exceptions.  Attempting to punch a 
sheet size other than 8.5” x 11” (LEF) will cause a jam. 
• SmartPunch cannot punch tabs. Tabs will have to be run, punched and inserted offline. 

•  Use a colored sheet insert (instead of the tab) in the job workflow for easier tab insertion after the job 

has been run.  

 

SmartPunch is activated by the touch of a button.  
•  It can be activated from Multi-function Touch Panel Display. 

•  It also can be activated from the driver at your PC.