Read Sharp MX-GBX1 Service Manual online
9
2.5 DOCKING BRACKET INSTALLATION
The docking brackets for the upstream
device are shipped in a separate bag along
with size M4 mounting screws (not shown).
device are shipped in a separate bag along
with size M4 mounting screws (not shown).
Install as shown with the bracket marked “R”
on the right side facing you as you look at
the exit side of the upstream device. Install
the bracket marked “L” on the left side facing
you. Both brackets should be oriented with
the arrow facing up.
on the right side facing you as you look at
the exit side of the upstream device. Install
the bracket marked “L” on the left side facing
you. Both brackets should be oriented with
the arrow facing up.
Before the system can be docked correctly
the paper guide on the finisher needs to be
removed. This is not used on the finisher
when in line with the SmartPunch.
The docking bracket provided with the
finisher should be attached to the
downstream side of the SmartPunch with 4
size M4 screws.
the paper guide on the finisher needs to be
removed. This is not used on the finisher
when in line with the SmartPunch.
The docking bracket provided with the
finisher should be attached to the
downstream side of the SmartPunch with 4
size M4 screws.
Click on the first or last page to see other MX-GBX1 service manuals if exist.