MX-FX11 (serv.man5). Revised December 2010 - Sharp Copying Equipment Service Manual (repair manual). Page 15

MX-FX11  FAX SOFTWARE SWITCH  2 – 11

38

8

Print

Selection of error page 
output when error 
occurs during FAX 
reception.

Setting to determine whether to output the error page or to not output it and 
discard it in cases where communication errors occur during FAX reception.
"0": Output the error page
"1": Do not output the error page
However, in cases where errors occur during F code relay-instructed reception 
or F code confidential reception, the error page is not outputted irrespective of 
this SW setting.

39

1

Transmission

Selection of re-send 
page at times of error

Select the page to be re-sent when errors occur during transmissions that do 
not contain F code.
"0": Error page and onwards (re-send from the pages that have not been 
transmitted to the other party’s machine).
"1": All pages (re-send from the first page including pages that have been 
transmitted to the other party’s machine). 
When transmitting in F code, all pages are re-transmitted irrespective of this 
setting.

2

Print

Selection of date and 
transmission source 
print language 
<Format>

Setting to determine the format of the date and transmission source attached 
when transmitting FAX.
"0": Date format
"1": North American format

3

Print

Relay data output

Setting to determine whether or not to output documents received from the 
relay command station when F code relay broadcast instructions are received.
"0": Output
"1": Do not output

4

Transmission

F code relay broadcast 
FAX sender addition 
setting

Setting to determine whether the machine's sender is added or not when relay 
broadcast send is performed to the FAX remote machines which are registered 
in the machine (relay broadcast instruction receiving station) after receiving the 
F code relay broadcast instruction is received from a remote machine.
This is in order to cope with the FAX circular specifications.
"0": Added
"1": Not added

5

Communication

F code communication 
error handling

Setting to determine whether or not to re-send at times of F code 
communication.
"0": Re-send
"1": Do not re-send
However, do not re-call in cases where the "Re-call permission at times of 
communication error" setting is at "0: Prohibited."
Do not re-send when the other party’s machine does not have F code functions.

6

Transmission

F code password 
transmission setting 
when the other party’s 
machine has no 
password capacity

Setting to determine the communication procedure in cases where the other 
party’s machine has no F code password capacity when conducting F code 
communication.
"0": Disconnect with DCN
"1": Send with password

7

Function

Remaining receivable 
memory

Setting to determine whether to issue a call when remaining memory reaches 
64KB or less or 128KB or less.
"0": 128KB
"1": 64KB

8

Function

External telephone 
setting when no sound 
is set 

Setting to determine whether or not to use external telephone when no sound is 
set.
When the no sound priority setting is made, reception operation is soundless 
but communications cannot be sent to and from an external telephone.
When the external telephone priority setting is made, communications can be 
sent to and from an external telephone, but reception operation sounds once.
"0": External telephone priority
"1": No sound priority