MX-FNX1 (serv.man23). INDICATION OF TROUBLE CODE (e.g. F1-10) CAUSED BY STAPLING UNIT HARNESS - Sharp Copying Equipment Technical Bulletin (repair manual). Page 3

Read Sharp MX-FNX1 (serv.man23) Technical Bulletin online

 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
CCE-547 
 
- How to identify implementation of the harness break preventive action  
(1) For an inner finisher that has undergone all actions of Nos. 1, 2 and 3 above, a green 
sticker is added at the top left of the front lock cover inside the finisher front cover.  
(See the photograph below.) 
(2) For an inner finisher that has undergone action No. 1 (firmware change) only, a blue 
sticker is added to the top left of the front lock cover inside the finisher front cover.  
(See the photograph below.) 
 
 
 
4. For the field: 
      - For an inner finisher yet to be used, the firmware change is recommended.  
- For an inner finisher that has been used but not suffered harness break yet, the firmware 
change is recommended.  
- For an inner finisher that has been used and already suffered harness break, all actions of 
Nos. 1, 2 and 3 are recommended.  
 
5. Action:   
     From December 2007 production 
 
6. Parts Action: 
Current parts 
New parts 
Ref. 
No. 
Model 
name 
Version  P/G No. 
Parts code 
Parts code 
Price 
rank 
Parts name 
Effective 
time 
Inter- 
change- 
ability 
Number 
 6- 
--- 
0CW4141P162// 
AH 
HARNESS GUIDE 
 6-26 
10-26 
0CW4141K219// 
0CW4141K219D/ 
BB 
HARNESS 
1 
MX-FNX1 
ALL 
10-13 
0CW4141K201X/ 
0CW4141K201Y/ 
CQ 
CONTROL PWB 
2007/11 
or 
2007/12 
3 
1 
<Interchange> 
1. Interchangeable. 
4. Not interchangeable. 
2. Current type can be used in place of new type. 
New type cannot be used in place of current type. 
5. Interchangeable if replaced with same types of  
related parts in use. 
3. Current type cannot be used in place of new type. 
New type can be used in place of current type. 
6. Others. 
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with 
specified ones for maintaining the safety and performance of the set. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Page of 3
Display

Download Sharp MX-FNX1 (serv.man23) Technical Bulletin

Found More:

MX-FNX1 (serv.man23) Service Manuals

Preview DownloadPagesSize
MX-FNX1 (serv.man2) Complete Manual . Service Manual 80 16.43 MB
MX-FNX10 MX-FN10 Service Manual (Complete) Service Manual 56 17.37 MB
MX-FNX1 (serv.man12) Section 10 - Electrical Section . Service Manual 16 1.31 MB
MX-FNX1 (serv.man11) Section -9 - Self Diagnosis and Trouble codes . Service Manual 3 117.13 KB
MX-FNX1 (serv.man10) Section -8 - Adjustments . Service Manual 2 216.16 KB
MX-FNX1 (serv.man9) Section -7 - Maintenance . Service Manual 1 314.66 KB
MX-FNX1 (serv.man8) Section -6 - Disassembly and Assembly . Service Manual 13 6.55 MB
MX-FNX1 (serv.man7) Section -5 - Operational Descriptions . Service Manual 9 1.73 MB
MX-FNX1 (serv.man6) Section -4 - Outside View and Internal Structure . Service Manual 5 416.18 KB
MX-FNX1 (serv.man5) Section -2 - Specifications . Service Manual 2 139.47 KB
MX-FNX1 (serv.man4) Section -1 - Product Overview . Service Manual 1 476.38 KB
MX-FNX1 (serv.man3) Front and Rear Covers . Service Manual 6 822.45 KB
MX-FNX1 (serv.man13) Revised November 11 Parts Guide 28 4.92 MB
MX-FNX10 (serv.man2) Parts Guide (Revised July 2017). Parts Guide 72 11.09 MB
MX-FNX1 Specifications . Specification 2 139.47 KB
MX-FNX10 (serv.man16) ELIMINATION REDUCTION OF SPRINGS FOR PRODUCTIVITY IMPROVEMENT. Technical Bulletin 2 178.66 KB
MX-FNX10 (serv.man27) DELIVERY SENSOR LEVER OF THE MAIN UNIT COMING LOOSE WHEN THE RELAY UNIT (MX-RBX3) IS PULLED Technical Bulletin 2 114.32 KB
MX-FNX10 (serv.man26) LASTING SUPPORT FOR THE STAPLER UNIT OPERATION LOCK (F1-08 ERROR CODE) Technical Bulletin 2 104.06 KB
MX-FNX10 (serv.man25) IMPROVED PAPER FEEDING PERFORMANCE THROUGH THE SADDLE FOR A3 SIZE, ETC. Technical Bulletin 2 88.14 KB
MX-FNX10 (serv.man24) SUPPORT FOR JAMMING (FPPD2_S, ETC.) IN THE SADDLE OPENING Technical Bulletin 3 619.27 KB
MX-FNX10 (serv.man23) F1-43 TROUBLE CODE OCCURRENCE RESULTING FROM SADDLE ALIGNMENT GLITCH WHEN POWER IS ON Technical Bulletin 3 356.31 KB
MX-FNX10 (serv.man22) MACHINE NOISE REDUCED DURING INITIAL OPERATION Technical Bulletin 2 141.44 KB
MX-FNX10 (serv.man21) CCE-1099 - ENHANCEMENT FOR PAPER MISALIGNMENT OF FOLDING DUE TO SKEW AT SADDLE Technical Bulletin 1 125 KB
MX-FNX10 (serv.man20) ENHANCEMENT FOR JAM CAUSED BY WORN OUT TRANSPORT RIBS ON TOP COVER Technical Bulletin 2 66.14 KB
MX-FNX10 (serv.man19) IMPROVEMENT OF STRENGTH OF SADDLE STITCH GEAR Technical Bulletin 2 206.51 KB
MX-FNX10 (serv.man18) MX-FNX9 FN10 FN11 FN18 PNX6 ROM CHANGE FOR VIRGO 2 MODELS - MX-4140 4141 5140 5141N - BULLETIN ONLY Technical Bulletin 1 19.73 KB
MX-FNX10 (serv.man17) ARE-1123 MXFN10 Firmware Upgrade B88 V01.14.02.00 Model specific separate folders inside (Bulletin Only) Technical Bulletin 1 81.26 KB
MX-FNX10 (serv.man40) F1-43 TROUBLE CAUSED BY LOCKED ADJUSTMENT PLATE Technical Bulletin 2 197.65 KB
MX-FNX10 (serv.man28) F1-08 ERROR CAUSED BY AN OPERATION LOCK OF THE STAPLER UNIT Technical Bulletin 3 293.47 KB
MX-FNX10 (serv.man29) GUIDE SR-SG-GP-F R NOT OPENING CAUSING ANGLED PAPER EJECTION Technical Bulletin 2 87.18 KB
MX-FNX10 (serv.man30) FPDD_S JAMMING CAUSED BY THE SPRING OF THE UDG ARM SHAFT BREAKING Technical Bulletin 2 84.58 KB
MX-FNX10 (serv.man31) IMPROVED PAPER FEEDING PERFORMANCE THROUGH THE SADDLE FOR A3 SIZE (FPPD3_N) Technical Bulletin 2 114.12 KB
MX-FNX10 (serv.man32) INCREASE TO THE PAPER SKEW DURING SWITCHBACK TRANSPORT Technical Bulletin 2 72.23 KB
MX-FNX10 (serv.man33) FN10 ROM UPGRADE ... (5).FIX FOR FPDD_S JAMS Technical Bulletin 1 26.16 KB
MX-FNX10 (serv.man34) PART DISCONTINUATION AND PROFILE CHANGE DUE TO PRODUCTION EFFICIENCY INCREASE Technical Bulletin 2 106.98 KB
MX-FNX10 (serv.man35) SADDLE STAPLE JAM (FPPD3_N) NORMALLY A3 Technical Bulletin 3 240.66 KB
MX-FNX10 (serv.man36) IMPROVEMENTS TO SADDLE STITCH FINISHER (MX-FN10) Technical Bulletin 4 290.66 KB
MX-FNX10 (serv.man37) ROM UPGRADE ... (2) TO (3) Technical Bulletin 2 39.67 KB
MX-FNX10 (serv.man38) IMPROVEMENT OF SADDLE FINISHER (MX-FN10) Technical Bulletin 16 1.14 MB
MX-FNX10 (serv.man39) ROM UPGRADE 1 Technical Bulletin 1 18.63 KB
MX-FNX10 (serv.man14) CCE-1402 ADDITION OF PROTECTOR SHEET FOR FALL PREVENTION OF A SENSOR PREVENTION OF F1-31 Technical Bulletin 2 197.35 KB
MX-FNX10 (serv.man13) Firmware update (14). Technical Bulletin 1 55.04 KB
MX-FNX10 (serv.man15) SETUP OF NEW SERVICE PARTS FOR SADDLE STAPLER AS SINGLE ITEM. Technical Bulletin 2 132.15 KB
MX-FNX1 (serv.man16) CCE-1308 COUNTERMEASURE FOR JAM DUE TO DETERIORATION OF CUSHION Technical Bulletin 5 630.32 KB
MX-FNX1 (serv.man17) Countermeasure For Paper Jam POD1_S POD2_S Around Entrance Of Finisher. Technical Bulletin 5 661.7 KB
MX-FNX1 (serv.man18) COUNTERMEASURE FOR PAPER JAM (POD2_S) AROUND ENTRANCE SECTION OF INNER FINISHER Technical Bulletin 3 289.5 KB
MX-FNX1 (serv.man19) COUNTERMEASURE FOR JAM (POD1_S ETC) CAUSED BY PAPER BEING TOUCHED TO ENTER GATE WHEN PERFORMING 2-SIDED PRINT WITH A3 PAPER Technical Bulletin 1 114.33 KB
MX-FNX1 (serv.man20) ENHANCEMENT TO PREVENT MISFEED DUE TO BUNCH ROLLER PRESSURE LEVER BECOMING DETACHED Technical Bulletin 2 128.86 KB
MX-FNX1 (serv.man21) IMPROVED STRAIGHT-AHEAD PAPER MOVEMENT DUE TO BELT COLLAR UNIT ON TRANSPORT SECTION BEING CHANGED IN SHAPE Technical Bulletin 2 96.04 KB
MX-FNX1 (serv.man22) BREAKAGE OF STAPLER NEEDLE FIXING LEVER. Technical Bulletin 2 93.85 KB
MX-FNX1 (serv.man24) Staple cartridge As Service Part Technical Bulletin 1 45.97 KB
MX-FNX1 (serv.man26) 001-IMPROVE INNER FINISHER CONSISTENCY Technical Bulletin 2 121.97 KB
MX-FNX1 (serv.man25) 001-Firmware UPGRADE .(1) Technical Bulletin 2 70.76 KB
MX-FNX1 (serv.man14) C-Jupiter_INFIN_01.06.00_A Please refer to Bulletin 004 Driver / Update 96.53 KB
MX-FNX1 (serv.man15) Pastel_INFIN_01.06.00_A Please refer to Bulletin 004 Driver / Update 96.53 KB
MX-FNX10 (serv.man3) Firmware update (14). File contains model specific folders and Technical Bulletin. Driver / Update 2.75 MB
MX-FNX10 (serv.man4) ARE-1123 MXFN10 Firmware Upgrade B88 V01.14.02.00 Model specific separate folders inside (Bulletin Embedded) Driver / Update 2.3 MB
MX-FNX10 (serv.man5) For MX4140N-5141N Models -Production Run September 2013 Driver / Update 267.89 KB
MX-FNX10 (serv.man6) Special firmware for F1-08 problems Driver / Update 1.53 MB
MX-FNX10 (serv.man7) For MXM283 363N and MX453 503N Production Run Date July 2010 - FIX FOR FPDD_S JAMS Driver / Update 223.59 KB
MX-FNX10 (serv.man8) For MX4100 1N and MX5000 1N Production Run Date July 2010 - FIX FOR FPDD_S JAMS Driver / Update 224.46 KB
MX-FNX10 (serv.man9) For MX2600N and MX3100N Production Run Date July 2010 - FIX FOR FPDD_S JAMS Driver / Update 224.47 KB
MX-FNX10 (serv.man10) For MXM283 363N and MX453 503N Production Run Date May 2009 Driver / Update 285.45 KB
MX-FNX10 (serv.man11) For MX4100N and MX5000N Production Run Date May 2009 Driver / Update 286.33 KB
MX-FNX10 (serv.man12) For MX2600N and MX3100N Production Run Date May 2009 Driver / Update 286.33 KB

Random: