MX-FN27. Service Manual for N Version - Sharp Copying Equipment Service Manual (repair manual). Page 40

MX-FN27 N, MX-PN14  OPERATIONAL DESCRIPTION  6 – 14

The paper in the processing tray is delivered in stacks using the assist guide and assist claw.

The assist guide supports the trailing edge of the paper stack, and the assist claw pushes out to eject the stack.

The assist guide's home position is detected by the Assist home position sensor (FNPS7).

The assist guide and assist claw are moved to the stack delivery position by the rotating assist motor They are returned to their home positions by the
Assist motor (FNM5) rotating in reverse.

Normally in non-sort or shift-sort mode, paper aligned and shifted on the processing tray is divided every five sheets and delivered. If the sixth sheet
is the last sheet, the last sheet is included to create a six-sheet stack and delivered.

The following table shows the number of divided delivery sheets depending on the paper type, paper size, and paper weight.

OHP, label, postcard, envelope, 
transparency

 -

 -

1 sheet

Recycled, pre- punched

Paper width: 210.0 mm to 297.0 mm
Paper length: 173.4 mm to 431.8 mm

 -

2 sheets

Other than above

 -

1 sheet

Other than above

Paper width: 210.0 mm to 297.0 mm
Paper length: 173.4 mm to 431.8 mm

105g/m2 or less

Paper length: 182 mm to 216 mm
Paper width 210 mm to less than 279.4 mm (16K, 
EXEC, B5)
2 sheets

Paper length: 355.6 mm (LGL) or more
2 sheets

Other than above: 3 sheets

More than 105g/m2

2 sheets

Other than above

-

1 sheet

Assist motor (FNM5)

Assist home position sensor

(FNPS7) 

Assist Guide 

Assist Claw 

Assist Claw