Read Sharp MX-FN27 Service Manual online
MX-FN27 N, MX-PN14 OPERATIONAL DESCRIPTION 6 – 11
(4)
Alignment Operation in Staple Mode
1)
After the Delivery sensor (FNPS1) detects the trailing edge of the
paper, the front and rear alignment plates move to the wait posi-
tions.Explanation for 2-point stapling will be omitted because it is
the same as the center alignment operation in Non-sort mode.
paper, the front and rear alignment plates move to the wait posi-
tions.Explanation for 2-point stapling will be omitted because it is
the same as the center alignment operation in Non-sort mode.
– Front 1-point stapling (front alignment plate position: paper
width position (148.5 mm), rear alignment plate position: paper
width + 5 mm)
width + 5 mm)
– Rear 1-point stapling (front alignment plate position: paper
width + 5 mm, rear alignment plate position: center + 148.5
mm)
mm)
2)
Move the front and rear alignment plates to align the paper.
(5)
Alignment Operation in Staple-free Staple Mode
Explanation for staple-free staple mode will be omitted because it is
the same as the center alignment operation in Non-sort mode.
the same as the center alignment operation in Non-sort mode.
Rear Alignment Plate
End of Paper
+5 mm
Middle of Feeding Path
148.5 mm
Front Alignment Plate
Rear Alignment Plate
End of Paper
+5 mm
Middle of Feeding Path
148.5 mm
Front Alignment Plate
5mm
5mm
Middle of Feeding Path
Rear Alignment Position
Front Alignment Position
Click on the first or last page to see other MX-FN27 service manuals if exist.