Read Sharp MX-C380P / MX-C400P / MX-B380P / MX-B382P / MX-B400P (serv.man6) Service Manual online
MX-C400P/C380P, MX-B400P/B380P/B382P SIMULATION 5 – 47
44-4
Purpose
Setting
Function (Purpose) Used to set the conditions of the high den-
sity process control operation.
Section
Process
Operation/Procedure
1) Select an item to be set.
2) Set the set value. (Enter the set value, and press [OK] key and
1) Select an item to be set.
2) Set the set value. (Enter the set value, and press [OK] key and
OSA shortcut key.)
NOTE: Set the items to the default values unless a change is spe-
cially required.
• MX-C400P/C380P
• MX-B400P/B380P/B382P
44-6
Purpose
Adjustment
Function (Purpose) Used to execute the high density process
control forcibly.
Section
Process
Operation/Procedure
Select [EXECUTE] button, and press [OK] key.
In case of a normal completion, the result is saved.
In case of an abnormal completion, "ERROR" is displayed.
(Refer to the table below.)
In case of an ERROR, the previous correction data are saved.
Select [EXECUTE] button, and press [OK] key.
In case of a normal completion, the result is saved.
In case of an abnormal completion, "ERROR" is displayed.
(Refer to the table below.)
In case of an ERROR, the previous correction data are saved.
G
REG_R LED ADJ
Image density sensor light
emitting quantity
adjustment value
emitting quantity
adjustment value
1 - 255
32
H
REG_R DARK
Image density sensor dark
voltage
voltage
0 - 255
0
I
REG_R GRND
Belt base detection level
when completion of Item
G adjustment
when completion of Item
G adjustment
0 - 256
0
J
REG_R BELT MAX
Maximum value of belt
base detection level
base detection level
0 - 255
0
K
REG_R BELT MIN
Minimum value of belt
base detection level
base detection level
0 - 255
0
L
REG_R BELT DIF
Belt base detection level
difference (Item J - Item K)
difference (Item J - Item K)
0 - 255
0
M
REG_R PATCH (K)
Patch detection level for
check
check
0 - 255
0
Error name
Error content
Image density sensor
adjustment abnormality
adjustment abnormality
PCS_K LED ADJ error
The target is not reached by 3 times of retry.
The target is not reached by 3 times of retry.
Substrate scan abnormality
PCS_K GRND error
Effective difference between the upper and
lower values of the belt substrate circuit,
outside the range
Effective difference between the upper and
lower values of the belt substrate circuit,
outside the range
Registration sensor R
adjustment abnormality
adjustment abnormality
REG_R LED ADJ error
The target is not reached by 3 times of retry.
The target is not reached by 3 times of retry.
Registration substrate R
scan abnormality
scan abnormality
REG_R GRND error
Effective difference between the upper and
lower values of the belt substrate circuit,
outside the range
Effective difference between the upper and
lower values of the belt substrate circuit,
outside the range
Item/Display
Content
Setting
range
Default
value
A
PCS_CL TARGET
Color sensor target set
value
value
1 - 255
98
B
PCS_K TARGET
Black sensor target set
value
value
1 - 255
208
C
LED_CL OUTPUT
Color sensor light
emitting quantity set
value
emitting quantity set
value
1 - 255
21
D
LED_K OUTPUT
Black sensor light
emitting quantity set
value
emitting quantity set
value
1 - 255
21
E
PCS ADJSTMENT
LIMIT
LIMIT
Sensor adjustment
target limit value
target limit value
1 - 255
4
F
BELT GROUND DIF
Effective difference
between the belt 1 circuit
substrate upper and
lower limit values
between the belt 1 circuit
substrate upper and
lower limit values
1 - 255
1
G
BIAS_CL
STANDARD DIF
STANDARD DIF
Bias (for color) reference
calculation difference
calculation difference
0 - 255
60
H
BIAS_BK
STANDARD DIF
STANDARD DIF
Bias (for black)
reference calculation
difference
reference calculation
difference
0 - 255
0
I
BIAS PATCH
INTERVAL
INTERVAL
Patch bias output
interval
interval
1 - 255
60
Display/Item
Content
Range
Default
J
Y_PAT TARGET ID
Patch density standard
value (yellow)
value (yellow)
1 - 255
115
K
M_PAT TARGET ID
Patch density standard
value (magenta)
value (magenta)
1 - 255
124
L
C_PAT TARGET ID
Patch density standard
value (cyan)
value (cyan)
1 - 255
111
M
K_PAT TARGET ID
Patch density standard
value (black)
value (black)
1 - 255
4
N
HV BK_GROUND
LIMIT
LIMIT
Patch position substrate
light receiving effective
range value
light receiving effective
range value
1 - 255
60
Item/Display
Content
Setting
range
Default
value
A
PCS_K TARGET
Image density sensor
target set value
target set value
1 - 255
208
B
LED_K OUTPUT
Image density sensor
light emitting quantity
set value
light emitting quantity
set value
1 - 255
32
C
PCS ADJSTMENT
LIMIT
LIMIT
Sensor adjustment
target limit value
target limit value
1 - 255
4
D
BELT GROUND DIF
Effective difference
between the belt 1
circuit substrate upper
and lower limit values
between the belt 1
circuit substrate upper
and lower limit values
1 - 255
1
E
BIAS_BK
STANDARD DIF
STANDARD DIF
Bias I reference
calculation difference
calculation difference
0 - 255
0
F
BIAS PATCH
INTERVAL
INTERVAL
Patch bias output
interval
interval
1 - 255
60
G
K_PAT TARGET ID
Patch density standard
value I
value I
1 - 255
4
H
HV BK_GROUND
LIMIT
LIMIT
Patch position substrate
light receiving effective
range value
light receiving effective
range value
1 - 255
60
Result display
Content description
COMPLETE
Normal complete
ERROR
Abnormal end
INTERRUPTION
Forcible interruption
Details of error display
Content description
CL_SEN_ADJ_ERR
Color sensor adjustment abnormality
BK_SEN_ADJ_ERR
Black sensor adjustment abnormality
K_HV_ERR
K high density process control abnormality
C_HV_ERR
C high density process control abnormality
M_HV_ERR
M high density process control abnormality
Y_HV _ERR
Y high density process control abnormality
TIMEOUT_ERR
Time out
Item/Display
Content
Setting
range
Default
value
1
: ’11/Mar/15
1
Click on the first or last page to see other MX-C380P / MX-C400P / MX-B380P / MX-B382P / MX-B400P (serv.man6) service manuals if exist.