Read Sharp MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man6) Service Manual online
MX-C250 SIMULATION 6 – 43
44-62
Purpose
:
Setup/Adjustment
Function (Purpose)
Used to set the process control execution
conditions.
conditions.
Section
Process
Operation/Procedure
This simulation allows collective change in the set contents of
SIM44-4 and SIM44-28.
A suitable one is selected among a number of options depending
on the condition.
This simulation allows collective change in the set contents of
SIM44-4 and SIM44-28.
A suitable one is selected among a number of options depending
on the condition.
1) Select an item to be set with Arrow keys.
To change the image density in the high density area, select
[ PROCON TARGET].
To change the frequency of the process control operations,
[ PROCON TARGET].
To change the frequency of the process control operations,
select [PROCON MODE].
2) Enter the set value with 10 keys.
3) Press [OK]/[START] key.
The set value in step 2) is saved.
46
46-1
Purpose
:
Adjustment (Color copy mode)
Function (Purpose)
Used to adjust the copy density in the copy
mode.
mode.
Section
Operation/Procedure
1) Select an item to be set with 10 keys.
2) Enter the set value with 10 keys.
3) Press [OK]/[START] key.
The set value in step 2) is saved.
To adjust the copy density in the low density area, select the "LOW"
mode and change the adjustment value. To adjust the copy density
in the high density area, select the "HIGH" mode and change the
adjustment value.
When the adjustment value is increased, the copy density is
increased. When the adjustment value is decreased, the copy den-
sity is decreased.
mode and change the adjustment value. To adjust the copy density
in the high density area, select the "HIGH" mode and change the
adjustment value.
When the adjustment value is increased, the copy density is
increased. When the adjustment value is decreased, the copy den-
sity is decreased.
46-2
Purpose
:
Adjustment (Monochrome copy mode)
Function (Purpose)
Used to adjust the copy density in the copy
mode.
mode.
Section
Operation/Procedure
1) Select an item to be set with 10 keys.
2) Enter the set value with 10 keys.
3) Press [OK]/[START] key.
The set value in step 2) is saved.
Item/
Display
Contents
Note
Content
PRO-
CON
TAR-
GET
CON
TAR-
GET
Process con-
trol target
value regis-
tration
trol target
value regis-
tration
0 : CL
ID
DOWN
ID
DOWN
The densities of C, M, and Y
decrease. (The C/M/Y high density
process control target values
decrease.)
decrease. (The C/M/Y high density
process control target values
decrease.)
1 : CL
ID UP
ID UP
The densities of C, M, and Y
increase. (The C/M/Y high density
process control target values
increase.)
increase. (The C/M/Y high density
process control target values
increase.)
2 : BK
ID
DOWN
ID
DOWN
The density of K decreases. (The
high density process control target
value decreases.)
high density process control target
value decreases.)
3 : BK
ID UP
ID UP
The density of K increases. (The
high density process control target
value increases.)
high density process control target
value increases.)
4 : ALL
ID
DOWN
ID
DOWN
The densities of C, M, Y and K
decrease. (The C/M/Y/K high
density process control target
values decrease.)
decrease. (The C/M/Y/K high
density process control target
values decrease.)
5 : ALL
ID UP
ID UP
The densities of C, M, Y and K
increase. (The C/M/Y/K high
density process control target
values increase.)
increase. (The C/M/Y/K high
density process control target
values increase.)
6 :
NOR-
MAL
NOR-
MAL
The standard density of C, M, Y
and K. (The C/M/Y/K high density
process control target values are
the standard values.)
and K. (The C/M/Y/K high density
process control target values are
the standard values.)
PRO-
CON
MODE
CON
MODE
Density
adjustment
timing mode
adjustment
timing mode
0 :
HIGH
QUALIT
Y1
HIGH
QUALIT
Y1
The execution frequency of the
process control is high. (It is set
when the color image quality is
given priority.)
process control is high. (It is set
when the color image quality is
given priority.)
1 :
HIGH
QUALIT
Y2
HIGH
QUALIT
Y2
The execution frequency of the
process control is highest. (It is set
when the color image quality is
given priority.)
process control is highest. (It is set
when the color image quality is
given priority.)
2 :
PRINT
PER-
FOR-
MANCE
PER-
FOR-
MANCE
The execution frequency of the
process control is low. (It is set
when the job speed is given
priority.)
process control is low. (It is set
when the job speed is given
priority.)
3 : BW
MODE
MODE
The process control is executed in
the normal frequency. (It is set
when there are little color jobs and
many monochrome jobs.)
the normal frequency. (It is set
when there are little color jobs and
many monochrome jobs.)
4 :
NOR-
MAL
NOR-
MAL
The process control is executed in
the normal frequency.
the normal frequency.
Item/Display
Content
Set-
ting
ting
range
Default
value
1
LOW
TEXT
Exposure adjust-
ment (color copy)
text
ment (color copy)
text
1 - 99
50
2
TEXT/
PRINTED
PHOTO
PRINTED
PHOTO
Exposure adjust-
ment (color copy)
text/printed photo
ment (color copy)
text/printed photo
1 - 99
50
3
PHOTO-
GRAPH
GRAPH
Exposure adjust-
ment (color copy)
photograph
ment (color copy)
photograph
1 - 99
50
1
HIGH
TEXT
Exposure adjust-
ment (color copy)
text
ment (color copy)
text
1 - 99
50
2
TEXT/
PRINTED
PHOTO
PRINTED
PHOTO
Exposure adjust-
ment (color copy)
text/printed photo
ment (color copy)
text/printed photo
1 - 99
50
3
PHOTO-
GRAPH
GRAPH
Exposure adjust-
ment (color copy)
photograph
ment (color copy)
photograph
1 - 99
50
Item/Display
Content
Set-
ting
ting
range
Default
value
1
LOW
TEXT
Exposure adjust-
ment (monochrome
copy) text
ment (monochrome
copy) text
1 - 99
50
2
TEXT/
PRINTED
PHOTO
PRINTED
PHOTO
Exposure adjust-
ment (monochrome
copy) text/printed
photo
ment (monochrome
copy) text/printed
photo
1 - 99
50
3
PHOTO-
GRAPH
GRAPH
Exposure adjust-
ment (monochrome
copy) photograph
ment (monochrome
copy) photograph
1 - 99
50
Click on the first or last page to see other MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man6) service manuals if exist.