Read Sharp MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man6) Service Manual online
MX-C250 SIMULATION 6 – 42
44-29
Purpose
:
Setting
Function (Purpose)
Used to set the operating conditions of the
process control during a job.
process control during a job.
Section
Process
Operation/Procedure
1) Select an item to be set with Arrow keys.
2) Enter the set value with 10 keys.
3) Press [OK]/[START] key.
The set value in step 2) is saved.
NOTE: Set the items to the default values unless a change is spe-
cially required.
44-31
Purpose
:
Adjustment/Setup
Function (Purpose)
Used to adjust the OPC drum phase. (Man-
ual adjustment)
ual adjustment)
Section
Process
Operation/Procedure
NOTE: For the OPC drum phase adjustment, do not use this simu-
lation, but use SIM50-22 (auto adjustment).
1) Select item A with Arrow key.
2) Enter the value corresponding to the adjustment pattern with 10
keys.
3) Press [OK]/[START] key. (The adjustment pattern is printed out.)
4) Select an adjustment pattern whose deflection is within two
scale lines on the adjustment pattern of C,M, Y colors.
5) Select item B with Arrow keys.
6) Enter the adjustment pattern sheet number selected in proce-
dure 4).
7) Press [OK]/[START] key.
8) The adjusted adjustment pattern is printed.
44-37
Purpose
:
Adjustment/Setup
Function (Purpose)
Used to set the development bias correc-
tion level in the continuous printing opera-
tion.
tion level in the continuous printing opera-
tion.
Section
Operation/Procedure
1) Select an item to be set with Arrow keys.
2) Enter the set value with 10 keys.
3) Press [OK]/[START] key.
The set value in step 2) is saved.
NOTE: When the print density is varied in the continuous printing
operation, this simulation is used.
44-43
Purpose
:
Data display
Function (Purpose)
Used to display the identification informa-
tion of the developing unit.
tion of the developing unit.
Section
Developing system
Operation/Procedure
The identification number and the identification signal level of the
developing unit are displayed.
The identification number and the identification signal level of the
developing unit are displayed.
Item/Display
Content
Setting range
Default
value
1
COPY
During copy
job
job
0 - 2
0
No execu-
tion
tion
2
2
PRINTER
During print job
1
HV only
2
3
FAX
During FAX
print job
print job
2
HV -> HT
2
4
SELF
PRINT
During self
print
2
2
2
Item/Display
Content
Setting
range
Default
value
1
PRINT MODE
Print mode
1 : Deflection check pattern print for every 45 degrees (8-sheet print)
1 - 3
3
(SET
VALUE)
2 : Deflection check pattern print for every 90 degrees (4-sheet print)
3 : Deflection check pattern print at the set value (1-sheet print)
3 : Deflection check pattern print at the set value (1-sheet print)
2
COLOR
Phase adjustment
value BK -> CL
value BK -> CL
Angle step 0 degree (1) 45 degrees (2) 90 degrees (3) 135 degrees (4)
180 degrees (5) 225 degrees (6) 270 degrees (7) 315 degrees (8)
180 degrees (5) 225 degrees (6) 270 degrees (7) 315 degrees (8)
1 - 8
1
3
PAPER
Tray selection
1 : Manual paper feed
1 -3
2
2 : 1 CS
3 : 2CS
3 : 2CS
Item/Display
Contents
Range
Default
value
1
MUL_MC_ADJ
MC bias correction in the
continuous printing is
enabled / disabled.
continuous printing is
enabled / disabled.
0-1
0
Item/Display
Content
Display
range
1
DVCH KIND K
K color development unit identifica-
tion number
tion number
1 - 5
2
DVCH KIND C
C color development unit identifica-
tion number
tion number
1 - 5
3
DVCH KIND M
M color development unit identifica-
tion number
tion number
1 - 5
4
DVCH KIND Y
Y color development unit identifica-
tion number
tion number
1 - 5
5
DVCH_AD_K
K color developing unit identification
number AD value
number AD value
0 - 255
6
DVCH_AD_C
C color developing unit identification
number AD value
number AD value
0 - 255
7
DVCH_AD_M
M color developing unit identifica-
tion number AD value
tion number AD value
0 - 255
8
DVCH_AD_Y
Y color developing unit identification
number AD value
number AD value
0 - 255
Click on the first or last page to see other MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man6) service manuals if exist.