Read Sharp MX-B382 (serv.man6) Service Manual online
MX-B382/B402 SIMULATION 5 – 53
List of error displays in case of abnormal end
49-3
Purpose
Function (Purpose) Used to update the operation manual in the
Function (Purpose) Used to update the operation manual in the
HDD.
Section
Operation/Procedure
1)
1)
Insert the USB memory into the main unit.
* When the USB is not inserted, "INSERT A STORAGE E-
* When the USB is not inserted, "INSERT A STORAGE E-
MANUAL STORED ON" is displayed. When [OK] key is
pressed, the display is shifted to the folder select menu 1.
pressed, the display is shifted to the folder select menu 1.
2)
Press the folder button of the operation manual data. (The dis-
play is shifted to the operation manual update menu.)
The current version and the update version are displayed.
play is shifted to the operation manual update menu.)
The current version and the update version are displayed.
3)
Press [EXECUTE] key.
[EXECUTE] key is highlighted, and [YES] [NO] keys becomes
active from gray out.
[EXECUTE] key is highlighted, and [YES] [NO] keys becomes
active from gray out.
4)
When [YES] key is pressed, the selected operation manual is
updated.
When update is completed normally, "COMPLETE" is dis-
played. When terminated abnormally, "ERROR" is displayed.
updated.
When update is completed normally, "COMPLETE" is dis-
played. When terminated abnormally, "ERROR" is displayed.
50
50-1
Purpose
Adjustment
Function (Purpose) Copy image position, image loss adjust-
ment
Section
Operation/Procedure
1)
1)
Select an adjustment target item with [
] [] key.
2)
Enter the set value with 10-key.
Set the items other than RRCA, LEAD, and SIDE to the
default.
RRCA: Image lead edge reference position adjustment
LEAD: Lead edge image loss adjustment
SIDE: Side image loss adjustment
default.
RRCA: Image lead edge reference position adjustment
LEAD: Lead edge image loss adjustment
SIDE: Side image loss adjustment
3)
Press [OK] key. (The set value is saved.)
A. (RRC-A) Timing from starting document scanning to specifying
the image lead edge reference is adjusted. (01.mm/step)
the image lead edge reference is adjusted. (01.mm/step)
* When the value is decreased, the timing is advanced. When
the value is increased, the timing is delayed.
B - E. (RRC-B) Timing of paper (resist roller ON) for the image posi-
tion on the transfer belt is adjusted. (0.1mm/step)
tion on the transfer belt is adjusted. (0.1mm/step)
* When the value is decreased, the timing is delayed. When the
value is increased, the timing is advanced.
F. (LEAD) The lead edge image loss amount is adjusted. (0.1mm/
step)
step)
* When the value is increased, the image loss is increased.
G. (SIDE) The side image loss amount is adjusted.
* When the value is increased, the image loss is increased.
(0.1mm/step)
H. (DEN-A) The paper lead edge void amount is adjusted. (0.1mm/
step)
step)
* When the value is increased, the void is increased.
I. (DEN-B) The paper rear edge void amount is adjusted. (0.1mm/
step)
step)
* When the value is increased, the void is increased.
J. (FRONT/REAR) The void amount on the right and left edges of
paper is adjusted. (0.1mm/step)
paper is adjusted. (0.1mm/step)
IMAGE_DATA
Image ASIC data
WEB HELP
WEB help
UNICODE
UNICODE table
Item/Display
Content
CONF
Configuration data
ICUM
ICU Main section former half
ICUBM
ICU Boot section main
ICUCN
ICU Boot section CN
LANG
Language support data program (General term)
GRAPH
Graphic data for L-LCD
SLIST
SLIST data for L-LCD
PCUB
PCU Boot section
PCUM
PCU Main section
DESKB
Desk unit BOOT section
DESKM
Desk unit MAIN section
FINB
Inner finisher BOOT section
FINM
Inner finisher MAIN section
SCUB
SCU Boot section
SCUM
SCU Main section
FAXB
FAX1 Boot section
FAXM
FAX1 Main section
ESCP
ESC/P font
PDL
PDL font
ANIME
Animation data
IMGDT
Image ASIC data
WEBHP
WEB help
UNICD
UNICODE table
Item/Display
Content
Item/Display
Content
Setting
range
Default
value
A
Lead edge
adjustment
value
adjustment
value
RRCA
Document lead edge
reference position
(OC)
reference position
(OC)
0 - 99
50
B
RRCB-
CS1
CS1
Resist
motor
ON
timing
adjust-
ment
motor
ON
timing
adjust-
ment
Standard
Tray
Tray
1 - 99
60
C
RRCB-
DSK
DSK
Desk
1 - 99
50
D
RRCB-
MFT
MFT
Manual
paper
feed
paper
feed
1 - 99
60
E
RRCB-
ADU
ADU
ADU
1 - 99
50
F
Image loss
area setting
value
area setting
value
LEAD
Lead edge image
loss area setting
loss area setting
0 - 99
30
G
SIDE
Side image loss
area adjustment
area adjustment
0 - 99
20
H
Void area
adjustment
adjustment
DENA
Lead edge void area
adjustment
adjustment
1 - 99
30
I
DENB
Rear edge void area
adjustment
adjustment
1 - 99
30
J
FRONT/
REAR
REAR
FRONT/REAR void
area adjustment
area adjustment
1 - 99
30
K
Off-center
adjustment
adjustment
OFSET_
OC
OC
OC document off-
center adjustment
center adjustment
1 - 99
50
L
Magnification
ratio correc-
tion
ratio correc-
tion
SCAN_
SPEED_
OC
SPEED_
OC
SCAN sub scanning
magnification ratio
adjustment (CCD)
magnification ratio
adjustment (CCD)
1 - 99
50
M
Sub
scanning
direction
print area
correction
value
scanning
direction
print area
correction
value
DENB-
MFT
MFT
Manual feed
correction value
correction value
1 - 99
50
N
DENB-
CS1
CS1
Tray 1 correction
value
value
1 - 99
50
O
DENB-
CS2
CS2
Tray 2 correction
value
value
1 - 99
50
P
DENB-
CS3
CS3
Tray 3 correction
value
value
1 - 99
50
Q
DENB-
CS4
CS4
Tray 4 correction
value
value
1 - 99
50
R
DENB-
ADU
ADU
ADU correction
value
value
1 - 99
50
Click on the first or last page to see other MX-B382 (serv.man6) service manuals if exist.