Read Sharp MX-B201D (serv.man8) Service Manual online
MX-FX12 INSTALLATION PROCEDURE 1 - 2
3) Attach the large sponge, the middle sponge and the small
sponge.
4) Align the top frame portion of the FAX modem PWB with the
screw hole at the back of the speaker unit.
5) Place the holes of the bottom portion of the FAX modem PWB
onto the loosely tightened screws.
Slide the PWB to left to secure as shown below.
6) When RSPF is installed, secure the RSPF ground terminal
and the FAX modem PWB onto the copier using the screw
removed earlier in (4)-1).
removed earlier in (4)-1).
• When OC is installed, secure the FAX modem PWB onto
the copier using a supplied screw.
7) Secure the FAX modem PWB onto the copier using a supplied
screw.
8) Tighten two loosely tightened screws completely.
NOTE: Before attaching the plate, securely press the harness
between the MCU and the ANB to remove floating.
(5) Connect the cable, and the speaker connector
Connect the copier and the FAX modem PWB with the cable.
Fix the snap band to the FAX PWB.
NOTE: Connect the speaker connector to the FAX modem PWB.
NOTE: Attach the clamp so that the binding band is in position
shown in the figure below.
(6) Reattach the rear cabinet.
1) Reattach the rear cabinet and secure it using three screws.
2) Reattach the rear cabinet shielding plate and secure it using
one screw removed earlier.
Reattach the RSPF detached in Step (1).
Large sponge
Middle sponge
Small sponge
Reference
Reference
Reference
6
4
7
8
5
5
8
Speaker
connector
Cable
1
2
Click on the first or last page to see other MX-B201D (serv.man8) service manuals if exist.