Read Sharp MX-6201N / MX-7001N (serv.man41) Service Manual online
MX-7001N DRIVE SECTION Q – 27
6)
Disconnect the connector (M), and remove the tandem tray 2
paper feed clutch unit (N).
* When installing, fit the clutch rotation stopper.
paper feed clutch unit (N).
* When installing, fit the clutch rotation stopper.
7)
Remove the E-ring (O), and remove the tandem tray 2 paper
feed clutch (P)
feed clutch (P)
e. Vertical transport clutch upper
1)
Remove the rear cabinet and the rear cabinet lower. (Refer to
the "[A] EXTERNAL OUTFIT".)
the "[A] EXTERNAL OUTFIT".)
2)
Remove the tandem drive unit. (Refer to the "(1) Tandem drive
unit".)
unit".)
3)
Remove the E-ring (A), and remove the pulley (B), the parallel
pin (C), and the belt (D).
pin (C), and the belt (D).
4)
Remove the screws (E), and remove the couplings (F) and the
spring (G).
* When installing, apply thread locking material to the screws
spring (G).
* When installing, apply thread locking material to the screws
(A).
5)
Remove the E-rings (H), and remove the collars (I), the gears
(J), and the parallel pins (K).
(J), and the parallel pins (K).
Unit
Parts
1
Tandem drive unit
e
Vertical transport clutch upper
M
N
O
P
1-d
1-e
A
B
D
C
E
E
F
F
G
J
H
I
J
H
I
K
K
J
H
I
K
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man41) service manuals if exist.