Read Sharp MX-6201N / MX-7001N (serv.man41) Service Manual online
MX-7001N DRIVE SECTION Q – 26
5)
Remove the bearing (H) and the belt (I).
6)
Disconnect the connector (J), and remove the tandem tray
transport clutch unit (K).
* When installing, fit the clutch rotation stopper.
transport clutch unit (K).
* When installing, fit the clutch rotation stopper.
7)
Remove the E-ring (L), and remove the tandem tray transport
clutch (M).
clutch (M).
d. Tandem tray 2 paper feed clutch
1)
Remove the rear cabinet and the rear cabinet lower. (Refer to
the "[A] EXTERNAL OUTFIT".)
the "[A] EXTERNAL OUTFIT".)
2)
Remove the tandem drive unit. (Refer to the "(1) Tandem drive
unit".)
unit".)
3)
Remove the screws (A), and remove the couplings (B) and the
spring (C).
* When installing, apply thread locking material to the screws
spring (C).
* When installing, apply thread locking material to the screws
(A).
4)
Remove the E-rings (D), and remove the collars (E), the gears
(F), and the parallel pins (G).
(F), and the parallel pins (G).
5)
Disconnect the connector (H). Remove the screws (I), and
remove the support plate (J). Remove the screws (K), and
remove the frame (L).
remove the support plate (J). Remove the screws (K), and
remove the frame (L).
Unit
Parts
1
Tandem drive unit
d
Tandem tray 2 paper feed clutch
I
H
J
K
L
M
1-c
1-d
A
A
B
B
C
F
D
E
F
D
E
G
G
F
D
E
G
K
J
H
I
K
L
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man41) service manuals if exist.