Read Sharp MX-6201N / MX-7001N (serv.man41) Service Manual online
MX-7001N DRIVE SECTION Q – 25
3)
Remove the screws (A), and remove the couplings (B) and the
spring (C).
* When installing, apply thread locking material to the screws
spring (C).
* When installing, apply thread locking material to the screws
(A).
4)
Remove the screws (D), and remove the support plate (E).
Remove the screws (F), and remove the frame (G).
Remove the screws (F), and remove the frame (G).
5)
Disconnect the connector (H), and remove the tandem tray 1
paper feed clutch unit (I).
* When installing, fit the clutch rotation stopper.
paper feed clutch unit (I).
* When installing, fit the clutch rotation stopper.
6)
Remove the E-ring (J), and remove the tandem tray 1 paper
feed clutch (K).
feed clutch (K).
c. Tandem tray transport clutch
1)
Remove the rear cabinet and the rear cabinet lower. (Refer to
the "[A] EXTERNAL OUTFIT".)
the "[A] EXTERNAL OUTFIT".)
2)
Remove the tandem drive unit. (Refer to the "(1) Tandem drive
unit".)
unit".)
3)
Remove the screws (A), and remove the couplings (B) and the
spring (C).
* When installing, apply thread locking material to the screws
spring (C).
* When installing, apply thread locking material to the screws
(A).
4)
Remove the screws (D), and remove the support plate (E).
Remove the screws (F), and remove the frame (G).
Remove the screws (F), and remove the frame (G).
A
A
B
B
C
D
F
F
E
G
I
H
J
K
1-b
Unit
Parts
1
Tandem drive unit
c
Tandem tray transport clutch
1-c
A
A
B
B
C
D
F
F
E
G
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man41) service manuals if exist.