Read Sharp MX-6201N / MX-7001N (serv.man41) Service Manual online
MX-7001N DRIVE SECTION Q – 24
8)
Remove the resin ring (U), remove the pulley (V), the belt (W),
the parallel pin (X), and the pulley sheet (Y). Remove the
screws (Z), and remove the support plate (a).
the parallel pin (X), and the pulley sheet (Y). Remove the
screws (Z), and remove the support plate (a).
9)
Disconnect the connector (b). Remove the harness (d) from
the wire saddle (c). Remove the screws (e), and remove the
inner ventilation fan motor (Center) unit (f).
the wire saddle (c). Remove the screws (e), and remove the
inner ventilation fan motor (Center) unit (f).
10) Disconnect the connectors (g). Remove the screws (h), and
remove the tandem drive unit (i).
a. Paper feed motor
1)
Remove the rear cabinet and the rear cabinet lower. (Refer to
the "[A] EXTERNAL OUTFIT".)
the "[A] EXTERNAL OUTFIT".)
2)
Disconnect the connectors (A). Remove the screws (B). Disen-
gage the pawl (C) of the PWB supporter, and remove the
paper feed motor (D).
gage the pawl (C) of the PWB supporter, and remove the
paper feed motor (D).
b. Tandem tray 1 paper feed clutch
1)
Remove the rear cabinet and the rear cabinet lower. (Refer to
the "[A] EXTERNAL OUTFIT".)
the "[A] EXTERNAL OUTFIT".)
2)
Remove the tandem drive unit. (Refer to the "(1) Tandem drive
unit".)
unit".)
U
V
W
X
Y
a
Z
Z
f
e
b
c
d
h
i
1
g
g
g
Unit
Parts
1
Tandem drive unit
a
Paper feed motor
Unit
Parts
1
Tandem drive unit
b
Tandem tray 1 paper feed clutch
1-a
B
B
1-a
D
A
C
1-b
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man41) service manuals if exist.