Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man60) Service Manual online
MX-7000N LSU SECTION i – 6
3)
Remove the screws (A), and remove the earth wire (B).
Remove the cover (C).
* When installing the cover (C), engage the pawls (D) to cover
Remove the cover (C).
* When installing the cover (C), engage the pawls (D) to cover
lower (E). At this time be careful it bite the wire.
4)
Remove the screws (F), and remove the cover (G).
* When removing the cover (G), be careful to work place and
* When removing the cover (G), be careful to work place and
method, to don't enter the dust into the unit. Trouble (image
not fully etc.) may occur.
not fully etc.) may occur.
* When installing the cover, lock the pawl (H).
5)
Disconnect the connector (I), and remove the screws (J), and
remove the polygon motor (K). Disconnect the connector (L).
* When disassembling, be careful to drop the screw (etc.)
remove the polygon motor (K). Disconnect the connector (L).
* When disassembling, be careful to drop the screw (etc.)
inside the LSU.
* Don't touch the cover glass surface (M) of polygon motor.
6)
Loosen the screw (N), and remove the LSU thermistor 2 (O).
Disconnect the connector (P).
* When disassembling, be careful to drop the screw (etc.)
Disconnect the connector (P).
* When disassembling, be careful to drop the screw (etc.)
inside the LSU.
e. LSU thermistor 1
1)
Remove the left cabinet. (Refer to the “[A] EXTERNAL OUT-
FIT”.)
FIT”.)
2)
Remove the LSU. (Refer to the “(1) LSU”.)
3)
Remove the screws (A), and remove the earth wire (B) and
cover (C).
cover (C).
B
C
D
D
E
A
G
F
H
K
I
J
1-d
L
M
Unit
Parts
1
LSU
f
LSU thermistor 1
O
P
N
1-e
1-f
C
A
A
A
B
A
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man60) service manuals if exist.