Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man60) Service Manual online
MX-7000N LSU SECTION i – 8
2)
Remove the screws (A), and open the control box (B).
3)
Remove the screws (C), and remove the flywheel (D).
* Check to confirm that has not come in contact with the har-
* Check to confirm that has not come in contact with the har-
ness etc.
4)
Disconnect the connector (E). Remove the screws (F). Disen-
gage the pawl (G), and remove the duct (H).
gage the pawl (G), and remove the duct (H).
5)
Disconnect the connector (I). Remove the screws (J), and
remove the LSU shutter solenoid BK uint (K).
* When installing, engage the shutter drive shaft (L) to the
remove the LSU shutter solenoid BK uint (K).
* When installing, engage the shutter drive shaft (L) to the
solenoid arm (M).
6)
Disconnect the connector (N), and remove the snap band (O).
Remove the screws (P), and remove the mounting plate (Q).
* When installing, engage the spring (R) to the groove (S) of
Remove the screws (P), and remove the mounting plate (Q).
* When installing, engage the spring (R) to the groove (S) of
the mounting plate and the groove (T) of the solenoid arm.
7)
Disengage the pawl (U), and remove the LSU shutter solenoid
BK (V).
BK (V).
B
B
A
A
C
D
C
G
F
H
E
J
K
L
M
I
N
P
P
Q
R
S
T
O
V
U
b
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man60) service manuals if exist.