Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man60) Service Manual online
MX-7000N LSU SECTION i – 4
1)
Open the front cabinet (A).
2)
Remove the claning rod (B).
3)
Check the dirt of the cleaning base (C) (tip of the cleaning rod).
* When cleaning base is dirty, replace it. (Refer to the "B. Oth-
* When cleaning base is dirty, replace it. (Refer to the "B. Oth-
ers".)
4)
Insert the cleaning rod (B) in the hole which cleaning is
required so that the cleaning base is made downward slowly.
required so that the cleaning base is made downward slowly.
5)
Insert the cleaning rod (B) all the way and slide it back and
forth a few times for cleaning.
forth a few times for cleaning.
6)
Clean all the cleaning holes (D) (4-positions) on the dustproof
glass.
* When the cleaning base became extremely dirty, replace it.
glass.
* When the cleaning base became extremely dirty, replace it.
(Don't cleaning use dirty cleaning base other dustproof
glasses.)
glasses.)
b. LSU CNT PWB
1)
Remove the left cabinet. (Refer to the “[A] EXTERNAL OUT-
FIT”.)
FIT”.)
2)
Remove the LSU. (Refer to the "(1) LSU".)
3)
Remove the screws (A), and remove the earth wire (B).
Remove the cover (C).
* When installing the cover (C), engage the pawls (D) to cover
Remove the cover (C).
* When installing the cover (C), engage the pawls (D) to cover
lower (E). At this time be careful it bite the wire.
A
B
C
B
B
B
Unit
Parts
1
LSU
b
LSU CNT PWB
D
1-a
1-b
B
C
D
D
E
A
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man60) service manuals if exist.