Read JBL S 3100 User Guide / Operation Manual online
S2600/S3100 LOUDSPEAKER SYSTEMS
Specifications:
System:
S2600 S3100
Maximum Recommended
Amplifier Power:
400 watts
400 watts
Nominal Impedance:
6 ohms
6 ohms
Crossover Frequency:
950Hz
750Hz
System Sensitivity:
92dB
94dB
(2.83V @ 1 m)
(2.83V @ 1 m)
Low Frequency Transducer:
Model:
ME120 HS
ME150 HS
Nominal Diameter:
300mm (12in)
380mm (15in)
Voice Coil Diameter:
75mm (3in)
100mm (4in)
Sensitivity:
92dB
95dB
(2.83V @ 1 m)
(2.83V @ 1 m)
High Frequency Driver/Horn:
Models: 2426H Driver and H2600 Horn
Voice Coil Diameter: 45mm (1.75in) Edgewound Aluminum Ribbon
Magnetic Assembly Weight: 4.5kg (10lb)
Flux Density: 1.8T (18,000 gauss)
Sensitivity (on driver axis): 108dB (1 watt @ 1m)
General:
Dimensions:
984mm H x 559mm W
1111mm H x 559mm W
x 406mm D
x 406mm D
(38.75" x 22" x 16")
(43.75" x 22" x 16")
Net Weight:
52.3kg
56.8kg
(115lb)
(125lb)
Shipping Weight:
59kg
63.6kg
(130lb)
(140lb)
JBL Consumer Products, Inc.
80 Crossways Park West
Woodbury, NY 11797
80 Crossways Park West
Woodbury, NY 11797
A Harman International Company
Printed in USA on recycled paper 10/94
Part No. OMS2600/S3100
Part No. OMS2600/S3100
S2600, S3100
LOUDSPEAKER SYSTEMS
OWNER’S MANUAL
S 3 1 0 0
S 2 6 0 0
2
S 2 6 0 0
S 3 1 0 0
S2600/S3100 LOUDSPEAKER SYSTEMS
3
THE S2600 AND S3100
LOUDSPEAKER SYSTEMS:
LOUDSPEAKER SYSTEMS:
Today’s requirements for audio-
phile listening in the home environ-
ment place a high premium on
stereophonic imaging, and the
S2600 and S3100 systems, like the
Project Everest DD55000 system
before them, provide accurate
stereo soundstage imaging over a
wide listening area. At the same
time, the systems, with their horn
loaded high frequency section, can
deliver high acoustic output with
very low distortion.
ment place a high premium on
stereophonic imaging, and the
S2600 and S3100 systems, like the
Project Everest DD55000 system
before them, provide accurate
stereo soundstage imaging over a
wide listening area. At the same
time, the systems, with their horn
loaded high frequency section, can
deliver high acoustic output with
very low distortion.
PLACEMENT AND ADJUSTMENT:
JBL believes that the most
accurate stereo soundstaging will
normally take place when the
included angle between loudspeak-
ers and the listener is in the range
from 40 to 60 degrees, as shown in
Figure 1. In most listening spaces,
this translates into a loudspeaker-
to-loudspeaker distance of 2 to 3
meters, with the listener located at
a similar distance from the line con-
necting the loudspeakers. This will
normally take place when the
included angle between loudspeak-
ers and the listener is in the range
from 40 to 60 degrees, as shown in
Figure 1. In most listening spaces,
this translates into a loudspeaker-
to-loudspeaker distance of 2 to 3
meters, with the listener located at
a similar distance from the line con-
necting the loudspeakers. This will
result in a nominal listening angle of
about 53 degrees. The listener may
then move closer or farther away to
adjust the angle to taste.
about 53 degrees. The listener may
then move closer or farther away to
adjust the angle to taste.
In the condition we have
described here, place the loud-
speakers so that their baffles are
parallel to the wall behind them.
The exact placement is not critical.
Corner placement works well, since
the controlled radiation from the
systems will cause minimal reflec-
tion from the adjacent wall.
speakers so that their baffles are
parallel to the wall behind them.
The exact placement is not critical.
Corner placement works well, since
the controlled radiation from the
systems will cause minimal reflec-
tion from the adjacent wall.
If you choose to operate the
loudspeakers in a larger room with
greater spacing between them, it
may be necessary to angle them in
slightly (perhaps not more than 5 to
10 degrees) to achieve the desired
image stability over a wide listening
range.
greater spacing between them, it
may be necessary to angle them in
slightly (perhaps not more than 5 to
10 degrees) to achieve the desired
image stability over a wide listening
range.
Begin the setup procedure by
putting on a recording that has a
strong phantom center image.
(Most solo vocal recordings will sat-
isfy this requirement.) As you are
sitting in the middle, equidistant
from the loudspeakers, you should
hear a strong, unambiguous center
image. Take time here to adjust bal-
ance, if necessary. Then, as you
move slightly to one side, the
image should remain clearly cen-
tered.
strong phantom center image.
(Most solo vocal recordings will sat-
isfy this requirement.) As you are
sitting in the middle, equidistant
from the loudspeakers, you should
hear a strong, unambiguous center
image. Take time here to adjust bal-
ance, if necessary. Then, as you
move slightly to one side, the
image should remain clearly cen-
tered.
Loudspeaker
Loudspeaker
40° - 60°
Figure 1. The 40° to 60° listening angle.
Listening Area
