Read Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man7) Service Manual online
MX-6070N MX-PN16B/C/D (PUNCH MODULE) 16 – 2
5)
Open front cover of the finisher.
6)
Remove 4 screws to remove a fulcrum for top cover.
7)
Incline a lever to the right and open top cover.
8)
Slide the top cover toward the direction of an arrow 1 and remove
the top cover toward the direction of an arrow 2.
the top cover toward the direction of an arrow 2.
B. Removal of dummy unit
1)
Disconnect the connector on rear side.
2)
Remove a screw, slide toward front and uplift the guide. The hook
will be removed; remove the guide from rear side.
will be removed; remove the guide from rear side.
3)
Cut 5 sections of insertion slot for punch waste tray using a nipper
and remove.
and remove.
Top cover
Fulcrum
Screws
ĭ
Į
Ĭ
Click on the first or last page to see other MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man7) service manuals if exist.