Read Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man7) Service Manual online
MX-6070N MX-PN16B/C/D (PUNCH MODULE) 16 – 4
2)
Connect the connector on punch waste full sensor unit (Packed
item No.2) to the punch unit.
item No.2) to the punch unit.
F. Wiring and connecting a harness
1)
Wire the harness as shown in the photo below.
G. Attachment of Punch cushion A
1)
Attach the Punch cushion A (Packed item No.8) to the inner cover
along the reference face.
along the reference face.
H. Installation of punch waste tray
1)
Install the punch waste tray (Packed item No.4) as shown in the
photo below.
photo below.
I.
Attachment of top cover and rear cover
1)
Attach the top cover by moving toward the direction of an arrow 1.
Then slide the top cover in the direction of an arrow 2.
Then slide the top cover in the direction of an arrow 2.
2)
Close the top cover.
3)
Close the front cover of the finisher.
+DUQHVV
Reference face:
Touch inner cover with left side surface of Punch cushion A.
Touch Punch inner cover with back side of Punch cushion A.
Inner cover
Punch inner cover
Attach the cushion A.
Attach the cushion A.
3XQFKZDVWHWUD\
Click on the first or last page to see other MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man7) service manuals if exist.