Read Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man7) Service Manual online
MX-6070N MX-PN16B/C/D (PUNCH MODULE) 16 – 3
C. Attachment of positioning guide
1)
Attach right edge of positioning guide (Packed item No.5) in refer-
ence to the center of the scale. Use a screw (M3x6) removed in
the step 3) in “Unpacking”.
ence to the center of the scale. Use a screw (M3x6) removed in
the step 3) in “Unpacking”.
D. Installation of punch unit
1)
Attach Punch cushion B (Packed item No. 9) along the reference
face on Punch inner cover for Punch unit.
face on Punch inner cover for Punch unit.
2)
Install the punch unit (Packed item No.1) from rear side of the fin-
isher by letting it through under the top cover.
isher by letting it through under the top cover.
3)
Make sure there is no space between base of the punch unit and
a frame.
a frame.
4)
Fix the punch unit with a screw. Use a screw (M3x6) removed in
the step 3) in “Unpacking”.
the step 3) in “Unpacking”.
5)
Attach the fulcrum for top cover again using 4 screws.
E. Attachment of punch waste full sensor unit
1)
Remove filament tapes from the packing materials.
6FDOH
Reference face
Reference face
Punch inner cover
Top cover
Fulcrum
Screws
6HQVRUKROGHU
3XQFKZDVWHIXOOVHQVRUXQLW
+DUQHVVJXLGH
Click on the first or last page to see other MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man7) service manuals if exist.