Read Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man35) Technical Bulletin online
【Description】・・・(1)
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
78
Network
Correction of machine lockup which may occur when touches “Check Wireless LAN
Settings” in the environment where multiple access points with same SSID are set.
○
○
○
○
79
Network
Correction of operations gradually slowing down after polling for mail reception (POP3)
○
○
○
○
80
Network
Correction of failure to search global address book with designated search attribute
The problem occurs when Server Usage is registered in the order of User
Authentication and Address Book.
○
○
○
○
81
Network
Correction of image density become lighter
This problem occurs during external authentication for OSA because toner save mode
is enabled.
○
○
○
○
82
Copy
Change in Repeat Layout feature for Copy
- Changing parting line from 8 px to 2 px
- Addition of trim marks for marking line
- Addition of a feature to change layout method:
SIM55-3 SW No.42 Data 3
0: Positioning in a continuous manner (Default)
1: Positioning evenly
○
○
○
○
83
Copy
Correction of failure to print page number in position when “Pamphlet Style” and “Page
Number Print” are set together
○
○
○
○
84
Copy
Correction of machine lockup which may occur after finishing Preview for Easy Copy
and changing settings
○
○
○
○
85
Copy
Correction of machine lockup with a message “Please wait.” which may occur during
Copy job after clearing paper jam in Scanner mode
○
○
○
○
86
Copy
Correction of shifted position for Center Clearance in Copy job
○
○
○
○
87
Image Quality
Modification of occasional contamination with toner which appears on paper feed
direction side of output image
○
○
NA
NA
88
Image Quality
Correction of the problem that the periodic mis-registration of sub scanning may occur
when performing the registration adjustment.
○
○
○
○
89
Image Quality
Following default values have been changed as the countermeasure for the image with
the black stripe generated by the transfer cleaning failure:
(1) Soft SW (Sim55-2 SW12-4: 0->1) Enable the solid image output mode by 1st
transfer blade
(2) Soft SW (Sim55-2 SW27-4: 0->1) Enable the operation to output the solid image
when performing the transfer maintenance
Installing this firmware in the field will automatically change the settings to the above
settings.
NA
NA
○
○
90
Image Quality
Implementation of a Soft SW which interrupts a job to provide lubricant.
The purpose of implementing this Soft SW is to modify black streaks due to defective
Transfer cleaning.
0: No interruption during a job (Default)
1: The job is interrupted for application of lubricant,.
○
○
○
○
91
Image Quality
Correction of failure to execute auto registration adjustment after replacing toner
cartridge
The registration adjustment will not be executed unless it is executed manually or by
turning off and on the power.
○
○
○
○
○=applied
Click on the first or last page to see other MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man35) service manuals if exist.