Read Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man35) Technical Bulletin online
【Description】･･･(1)
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
16
Main unit
control
Correction of false detection of F2-22 (Discharge lamp trouble (K))
The trouble may occur while the job in monochrome mode (which tends to trigger the
execution of process control for BK) is mainly running.
NA
NA
○
○
17
Main unit
control
Correction of F2-65 trouble
This trouble may occur if the MFP is runs out of toner during continuous run, failing to
replenish the toner properly.
NA
NA
○
○
18
Main unit
control
Correction of failure to recognize original
The problem may occur if an OC cover is opened and closed too quickly after placing
an original on the table, failing to detect original size.
○
○
○
○
19
Main unit
control
Correction of machine lockup
The lockup may occur while scanning non standard size originals (with 235 mm in
width) on RSPF, displaying “Originals are being read”.
○
○
○
○
20
Main unit
control
Implementation of selection whether to execute auto registration of user information in
“User Control” -> “Default Settings” on main unit
○
○
○
○
21
Main unit
control
Implementation of following features to erase cache information on authentication for
cloud connection in User Control -> User List
- Delete Your Information for External Connect
- Delete All Information for External Connect
○
○
○
○
22
Main unit
control
Addition of a mode which shows toner quantity in MIB until it turns “Empty” using
values while toner quantity is “Low”
SIM26-69 H (MIB TONER LOW INDIXATION)
0: Retrieves information on toner quantity with value (Default)
1. Retrieves “Low” status (-3)
* “Toner Low” is not indicated with default condition.
○
○
○
○
23
Main unit
control
Implementation of a Soft SW which turns on/off the confirmation message displayed
when Blank Page Skip feature is enabled.
SIM55-3 SW No.44
Data 2 (Copy)
Data 3 (Image Send)
0: Display (Default)
1: Do not display
○
○
○
○
24
Main unit
control
Implementation of an error lamp setting in Device Settings with selections of “Not Use”,
“Blink Only” and “Light & Blink”
○
○
○
○
25
Main unit
control
Changing authentication setting for home directory during user registration from “Use
Login Name And Password for User Authentication” to “Use Login Name for User
Authentication”
○
○
○
○
26
Main unit
control
Modification of behavior during Toner near end status as follows:
- The alert on toner low is notified via E-RIC when an e-mail address is entered or
“Toner Low” is selected on management web page. This won’t be affected whether
SIM26-69 is set to A or C.
SIM26-69 (Operating condition during toner near end)
A: Whether to display a message to prompt preparation of toner
C: Whether to display a message to notify toner near end
○
○
○
○
27
Main unit
control
Correction of problem with touch panel which does not work in low temperature
environment
○
○
○
○
○＝applied
Click on the first or last page to see other MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man35) service manuals if exist.