Read Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man35) Technical Bulletin online
【Description】・・・(1)
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
1
Main unit
control
Implementation of Soft SW to print A5 size paper as A5R from Bypass tray.
When this SW is enabled, the A5 size image output from Bypass tray is automatically
output as A5R size.
SIM55-3 SW39 Data 5
0: Disabled (Default)
1: Enabled
*Following setting has to be turned ON to enable this feature:
System Settings > Printer Settings > Condition settings > Enable Detected Paper Size
in Bypass Tray: ON
○
○
○
○
2
Main unit
control
Correction of operational failure: Following problem occurred when the MFP was used
25 five days in a row (without turning off the power)
- A message which indicates machine is not available for usage appeared.
- The LCD turned dark.
○
○
○
○
3
Main unit
control
Correction of slowing down the transmission speed after sending multiple jobs
○
○
○
○
4
Main unit
control
Eliminating load on SSD
The log data are written many times under the environment where the MFP switches
to power save mode and recover from power save mode frequently. The transition time
from 1W power save mode -> silent recovery -> power save mode has been changed
from “1 min.” to “15 min.” to decrease the writing of log data to reduce load on SSD.
○
○
○
○
5
Main unit
control
Correction of failure to change the current status of Machine Identification from “Input
Tray Empty”
○
○
○
○
6
Main unit
control
Correction of failure to recover from power save mode
○
○
○
○
7
Main unit
control
Correction of failure to reflect the name of the registered paper type in the Tray
Settings
○
○
○
○
8
Main unit
control
Correction of failure to execute “Save User Count”
○
○
○
○
9
Main unit
control
Correction of failure which tapping of “Contacts/Group Address” icon on Home screen
rejected, displaying an error message “This function cannot be selected.”.
○
○
○
○
10
Main unit
control
Correction of E7-03 error or failure to start-up MFP
○
○
○
○
11
Main unit
control
Correction of high temperature offset on B4/B5 size paper with Plain Paper Weight
Setting 80 g/m² - 150g g/m²
Plain Paper Weight Settings
System Settings > Common Settings > Device Control
NA
NA
○
○
12
Main unit
control
Correction of L4-17~20
The error due to toner waste buildup caused by the failure to detect waste toner box
full has been fixed.
○
○
○
○
13
Main unit
control
Change of heater lamp control
This is to adjust to the fluorescent which flickers during fluctuation of voltage.
○
○
○
○
14
Main unit
control
Remedy of overtoning and toner dispersion due to replenishment of excess amount of
toner
○
○
○
○
15
Main unit
control
Correction of C1-01/03/05/07 trouble during MC cleaning under HH environment
NA
NA
○
○
○=applied
Click on the first or last page to see other MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man35) service manuals if exist.