MX-4100N, MX-4101N, MX-5000N, MX-5001N (serv.man170). ROM UPGRADE ... (1) - Sharp Copying Equipment Technical Bulletin (repair manual). Page 2

 

Sharp Electronics (UK) Ltd., Technical Services Group

CCE-613 

[Description] 

No. Subject 

Description 

1 

SIM and System 

settings related 

The auto color calibration could not be run when forms jam had occurred in a SPF even if 
the jam was cleared. It was run only after the power was switched on or off. This malfunction 
has been fixed. 

2 

SIM and System 

settings related 

The auto color calibration could not be run in the state where the maintenance code “FK3” 
(Web end) had been detected. This malfunction has been fixed. 

3 SIM 

related 

4 UI 

related 

Depending on the timing, in rare cases, power-on of the panel and a subsequent power-
off caused the malfunction that its operation did not start with a later power-on of the 
panel. This malfunction has been fixed. 

5 Network 

related 

In the case where POP3-SSL was in active mode settings under the environment of the 
IPSec (Security Architecture for Internet Protocol), the E-Mail Print did not work to print 
the attached files and hung up when an e-mail included two kinds of attached files, a file 
having the format accepted by the E-Mail Print and a file having the format not accepted. 
This glitch has been fixed. 

6 

Web page related 

With “User Count Display” selected on the Web page on a PC in the environment that the 
MFP machine had been configured for user authentication, the displayed count of full 
color printing performed by a user was added to the count of another user whose user No. 
was larger than the user No. of the user who did the print job. This failure has been fixed.