Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man170) Technical Bulletin online
Sharp Electronics (UK) Ltd., Document Systems Support
MX-FN27
MX-FN29
A11
【Description】
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
1
Main unit
control
Correction of failure to retrieve information on auto registered user via E-RIC
○
○
○
○
2
Main unit
control
Correction of failure to respond properly after double tapping Home key
○
○
○
○
3
Main unit
control
Correction of the problem that E7-93 trouble occurs while restoring the data
in Document Filing from past models
○
○
○
○
4
Main unit
control
Correction of E7-20 trouble occasionally caused by the misdetection
○
○
○
○
5
Main unit
control
Modification has been made to eliminate "Display only in MFP" from the
options of "View Password Entry Screen" in Remote operation so that it is
now selectable from 2options; "Display in Both PC and MFP" and "Display
only in PC".
○
○
Done
Done
6
Main unit
control
Modification has been made to be unable to change the settings of Paper
Type, Paper Size, Feeding Approved Job, Weight of Plain Paper for Paper
Tray from Web Page.
*When updating the version from 0201K100_16011400 or earlier version,
the modification will not be reflected.
○
○
Done
Done
7
Main unit
control
Modification has been made to be able to edit the address book from Web
Page while operating the main unit, and the message displayed on the main
unit during editing the Address Book has been changed.
○
○
Done
Done
8
Main unit
control
Correction of “PPD2-PRI” jam
Restoring the data in Document Filing from past model and then reprint the
data causes “PPD2-PRI” jam.
○
○
Done
Done
9
Main unit
control
Correction of “E7-03” which may occur depending on the timing when
starting up the machine
○
○
Done
Done
10
Main unit
control
Correction of failure for touch panel to respond after recovering from power
save mode in low temperature environment
○
○
Done
Done
11
Main unit
control
Correction of H3-02 error and enhancement to prevent misdetection of H4
error
○
○
Done
Done
12
Main unit
control
Preventive measure against Cartridge eject error (F2-95 to 98)
This measure will be necessary because there are units with an eject arm
with less force to eject the cartridge.
○
○
Done
Done
13
Main unit
control
Correction of L4-03 error
When a cover is opened after MFP entering Eco scan mode during
warm-up, the L4-03 error occurs due to misdetection.
○
○
Done
Done
14
Main unit
control
Correction of the misalignment from the center when changing the ratio
with“Side1/2, XY Ratio Settings”in Paper Settings of Web Page
○
○
Done
Done
15
Main unit
control
Correction of the problem that Hidden Pattern Print cannot be performed
when pressing “Print Now” in Document Filling
○
○
Done
Done
16
Main unit
control
Correction of the problem that the error is displayed by specifying the top
tray as the exit tray of FAX when MX-FN31 (Saddle Finisher) is installed.
○
○
Done
Done
17
Main unit
control
Correction of the following problem:
When Auto Power Shut-Off is enabled and also the motion sensor mode is
○
○
Done
Done
○=applied
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man170) service manuals if exist.