Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man170) Technical Bulletin online
Sharp Electronics (UK) Ltd., Document Systems Support
enabled, the machine occasionally cannot wake up from Energy Save
mode.
18
Main unit
control
Correction of the following problem:
When MX-FN31 (Saddle Finisher) is installed if the pamphlet print is
performed with Split ON, it is split by 15 pages although it should be split by
20 pages.
○
○
Done
Done
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-5070N
MX-6070N
19 Main unit control
Correction of the following problem:
When pressing the power key of the panel while MFP is waking up from
Energy Save mode by the motion sensor (For approx. 1.5-sec), the
detection processing of the power key of the panel will be disabled, and then
the power key of the panel will stop responding.
○
○
Done
Done
20 Main unit control Correction of U2-91 which may be caused after the power OFF/ON
○
○
Done
Done
21 Main unit control
Modification to eliminate the noise from the relay working on the
dehumidification heater or the noise from the fan driving which are
generated when receiving the network packet of Web Page reference etc. in
Energy Save mode.
○
○
Done
Done
22 Main unit control Correction of C4-20 trouble occasionally caused by the misdetection
NA
NA
○
○
23 Main unit control
Correction of the following problem:
The status indicator lamp does not light red when the toner cover of 50/60
PPM machines is opened.
NA
NA
○
○
24
Image quality
Correction of problem with coloring image
This problem occurs while printing with Overlays setting or printing the
image of overlapped graphics.
○
○
○
○
25
Image quality
Correction of background appeared on void area of scanned image with
Compression Ratio being set to "High”
○
○
○
○
26
Image quality
Correction of contamination on white paper which occurs while performing a
job with odd number of original / duplex print setting etc.
○
○
Done
Done
27
Image quality
For the improvement of the accuracy of the laser power correction, the
modification has been made not to apply the correction value manually
adjusted by the user or the service personnel to the data which is output with
SIM61-11(Laser power auto correction) and SIM61-12(Laser power manual
correction).
○
○
Done
Done
28
Image quality
Correction of the image runout which may be caused on the backside when
performing DSPF duplex scan
NA
○
Done
Done
29
Image quality
Addition of the button to execute the main charger cleaning mode to System
Settings to enable the administrator to perform the cleaning of the main
charger when the black line or color line (streak mottle) appears on the
printed paper
NA
NA
○
○
30
Image quality
Improvement of the problem that the uneven charge may be caused on
50/60 PPM models in low humidity environment.
NA
NA
○
○
31
Printer
On DirectOffice, the following modifications have been made:
*Support of Arabic, Hebrew, and Thai languages
*Correction of the problem that the frame border is printed when performing
Direct Print
○
○
○
○
32
Printer
Correction of data becomes unprintable while continue printing using Print
Release
○
○
○
○
33
Printer
Modification has been made to store the printer job received in Remote PC
○
○
Done
Done
○＝applied
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man170) service manuals if exist.